bastard file


Also found in: Encyclopedia, Wikipedia.
Translations

bastard file

n (Tech) → Bastardfeile f
References in periodicals archive ?
Tenders are invited for Half Round Bastard File 400Mm Nominal Length Bis Specification No: Is 1931/2000 Or Latest.
You don't need a power tool to sharpen hatchets or axes, just a sharp mill bastard file with a handle ($10 to $18).
As an interesting side note, one of the first lessons fliers had to learn was how to file a 2" steel cube into a perfect sphere using an 8" bastard file.
Using a bastard file, the cut ends were dressed and then beveled smooth with a Dremel tool and sanding drum to eliminate any sharp edges on the fixture.
Even playing endless games of Connect 4 with your dog or dropping a bastard file on to your sockless big toe seem like appealing alternatives to the SPL match.
Now, don't rat me off to Roy, but I took a couple of hours off one nice spring afternoon and filed it to fit (I don't have any power tools) with a 1/2 round bastard file.
A bastard file normally refers to one between coarse and second cut.
3) Lightly polish the trigger mortise using #400 wet or dry sandpaper backed by an eight-inch bastard file, to remove any small burrs that might scratch your new trigger during fitting.
Use a mill bastard file to sharpen hoes and digging tools.
Break out your trusty mill bastard file and put some sharp on those edges; it can be a real icy dog.
You'll also need a table saw, router with laminate trimming bit, belt sander, hammer, fine bastard file, paintbrush, dust mask, safety glasses, and a rubber mallet or roller.
Ax 36" Bent Single Bit; 12 Ea Slim taper file 6"; 12 Ea Slim taper file 8"; 24 Ea Flat Mill Bastard File l0"; 19 Ea Flat Mill Bastard File 12"; 6 Ea Flat Mill Bastard File 14"; 12 Ea 12" Rasp File.