Plow Bolt

Plow Bolt

A bolt that has a conical head with a flat top and a smaller square shank below the head to keep the bolt from turning as its nut is tightened. Such bolts are used to hold parts of the plow together that have scouring surfaces. The bolt head fits into a conical hole sized so that the top of the head is flush with the Scouring surface. If a bolt with a conventional head were used, the head would prevent good scouring and would eventually wear away.
Mentioned in ?
References in periodicals archive ?
Cutting edge, 988h loader, bolt - plow bolt - plow, 988h, 1 1/4" x 7" x 5 1/2".
He even bought a lot of plow bolts, thinking he would need at least some, as there are 54 bolts in each wing.
The most common method of installation is bolting with Wear Con plow bolts through the countersunk holes.
The most common method of installation is bolting with Wear-Con Plow Bolts through the counter-sunk holes.
Flame hardened plow bolts average 55 Re hardness for durability.
Tenders are invited for 125 ea 2"x5/8" x 16-1/2" w/1/2" holes, swedged point chisel spikes, 250 ea 1/2" x 2-1/2" plow bolts with nuts and lockwashers.