Stannic oxide

(redirected from Tin oxide)
Also found in: Medical, Encyclopedia.
Related to Tin oxide: Tin dioxide
tin oxide, SnO2, produced artificially as a white amorphous powder, and occurring naturally in the mineral cassiterite. It is used in the manufacture of white enamels, and, under the name of putty powder, for polishing glass, etc.

See also: Stannic

References in periodicals archive ?
Precisely controlled deposition of multiple layers of titanium dioxide, iron oxide and tin oxide onto mica substrate, renders an effect pigment, with both hiding power and high color intensity.
ITO is a blend of indium oxide and tin oxide in a ratio of 9:1 by weight.
In this research, core-shell structures made of zinc oxide and titanium oxide were grown on indium tin oxide beds in form of nanobars.
Preparation and characterization of transparent fluorocarbon emulsion doped with antimony tin oxide and [Tio.
The current industry-standard material for making transparent conductors is indium tin oxide, or ITO, which is deposited as two thin layers on either side of a separator film.
Faience, maiolica and delft are all made of an earthenware body covered in a lead glaze to which tin oxide has been added.
The conductive IML foils used are said to be optimised for injection moulding processing, and can be used for touchscreens to replace many currently established foils, which are generally made of indium tin oxide (ITO foils).
com)-- Indium tin oxide (ITO) is a solution of indium oxide and tin oxide which is found in a solid state.
Current touchscreens use a transparent conductive film known as indium tin oxide (ITO), which is expensive and less effective on larger devices such as tablets.
Since its discovery, graphene has been seen as a potential replacement for indium tin oxide (ITO), the conductive material most commonly used in electronics, but advances in this direction have been hindered by the limited conductivity of the material.
Some specific topics examined include the control of selenium emission during coal gasification, preparation and properties of biocomposite film with gelatin and poly(vinyl alcohol), electrodeposition of blue-gold thin film onto indium tin oxide coated glass, and mechanical behavior of ultra high performance concrete.
Barnim Leadless Glaze Frit 3195 17 Frit 3124 40 Frit 3134 20 China Clay 7 Silica 12 Zinc 4 Zirconium silicate 5 Tin Oxide 8 A Caiger-Smith W/A Glaze (1060[degrees]C) Lead bisilicate 35 Calcium borate frit 38 Zinc 5 China clay 2 Flint 7 Zirconium silicate 3 Tin oxide 10 Derek Emms' Glaze (fires 1060-1080[degrees]C lustre reduction 680[degrees]C) Lead bisilicate frit 30 Soft borax frit 60 China clay 10 Tin oxide 10 Barnim suggests that with the shift to leadless glazes to conform with new North American standards, aspects of traditional lustre are lost.