Any overheated motor may of course "seize" without warning; but so many complaints have reached us of accidents similar to yours while shooting the Aurora that we are inclined to believe with Lavalle that the upper strata of the Aurora Borealis are practically one big electric "leak," and that the paralysis of your engines was due to complete
magnetization of all metallic parts.
It was surprisingly observed that the
magnetization of sample 4C was significantly lower than that of 2C although the Co content is the same in each sample.
STT MRAM uses memory storage elements that take advantage of the effect inwhich a current that is passed through a magnetic material - such as a magnetic tunnel junction (MTJ)(3) - reverses its direction of
magnetization (Figure 1).
Initial solutions to the long acquisition times for 3-dimensional FSE imaging focused on obtaining more echoes per
magnetization pulse (i.e., increasing the echo train length, ETL) and reducing the time between successive
magnetization pulses (decreasing repetition time, TR).
While the intensity of
magnetization needed for both is almost the same, the directions of
magnetization differ: the values being -74 and 172 degrees respectively.
While in many cases the physical modeling has been limited to the properties related to the rolling directions, the use of computational methods in magnetic cores call for the knowledge of
magnetization curve and hysteresis loops in directions that are different from rolling directions possibility of defining an intrinsic
magnetization behavior in a [001](110) Fe Si (GO) single crystal is limited to the [001] and [0[bar.1]0] directions, because the
magnetization process in all the other directions is affected by the sample geometry (Fiorillo et al., 2002).
Using a minimum of mathematical "equipment," covers the classical
magnetization field, small motions of
magnetization, intrinsic damping, fluctuations, reversal of
magnetization in a very dilute array of small particles, and the reversal of
magnetization in arrays of particles and continuous media.
The application-specific solvers can be used for design work on rotating machinery, superconducting magnets, particle beams, dielectric insulation, and
magnetization or demagnetization processes.
Called DEMAG, the solver allows designers to optimize equipment designs by accurately simulating both the
magnetization process, and the subsequent demagnetization effects that might be encountered.
Step 1: Low
magnetization. The low magnetic field signal provides a broad field of data containing information on both the geometric and magnetic deformation of the pipe.
magnetization - the extent or degree to which something is magnetized
magnetization - the process that makes a substance magnetic (temporarily or permanently)