Next you buckle your greaves on your legs, and your cuisses on your thighs; then come your backplate
and your breastplate, and you begin to feel crowded; then you hitch onto the breastplate the half-petticoat of broad overlapping bands of steel which hangs down in front but is scolloped out behind so you can sit down, and isn't any real improvement on an inverted coal scuttle, either for looks or for wear, or to wipe your hands on; next you belt on your sword; then you put your stove-pipe joints onto your arms, your iron gauntlets onto your hands, your iron rat-trap onto your head, with a rag of steel web hitched onto it to hang over the back of your neck -- and there you are, snug as a candle in a candle-mould.
While reading your article on M2 machine gun PM in PS 682 (Sep 09), I noticed on top of Page 31 the backplate
threaded plug was shown in the wrong position.
It prevents mold deflection due to the continuous, uniform force of the magnet over the entire mold backplate
instead of at discrete points along its edges.
Brain Boxes' 3 Port Rs232 card only utilises one of the computer's PCI slots and has all three of its ports mounted on the backplate
, with an optional fourth port.
shall be capable of pumping 100% humid (saturated and condensing) air from each tower of a set of four wastewater aerobic digesters, through a dryer or water removal system, then through an lel gas detection system and then exhausted.
It said it could have been averted by installing a PS150 backplate
on the waste container.
--If you need to take off the backplate
, first ease the bolt forward.
They feature a stainless steel single-gang backplate
that mounts to a standard single-gang electrical box with two provided screws.
The handsomely built Xi3 Z3RO aluminum casing features rounded edges, honeycombed and chrome-plated end-caps and a backplate
that houses various built-in connectors.
Tenders are invited for modify traffic signal backplates
on various intersections, includes 1,806 traffic signal backplate
retro reflective; 161 modify existing traffic signal backplate
One appears to have a kickstand, while nothing much could be discerned about the final backplate
File between the face of the backplate
and the rear side of the rivet.