tie beam

(redirected from bending beam)
Also found in: Thesaurus, Encyclopedia.
Related to bending beam: Bending moment, bending stress, Cantilever beam

tie beam

n.
A horizontal beam forming the base of a triangular truss for a pitched roof, connecting the two side walls and supporting a pair of principals.

tie beam

n
(Building) a horizontal beam that serves to prevent two other structural members from separating, esp one that connects two corresponding rafters in a roof or roof truss

tie′ beam`


n.
a horizontal timber or the like for connecting two structural members to keep them from spreading apart.
[1815–25]
ThesaurusAntonymsRelated WordsSynonymsLegend:
Noun1.tie beam - a horizontal beam used to prevent two other structural members from spreading apart or separatingtie beam - a horizontal beam used to prevent two other structural members from spreading apart or separating; "he nailed the rafters together with a tie beam"
beam - long thick piece of wood or metal or concrete, etc., used in construction
References in periodicals archive ?
Tests according to Fraass and Bending Beam Rheometer methods do not provide complete answer regarding the low temperature properties, in particular the boundary temperature between viscoelastic and elastic stages.
Shear, Bending Beam, "S" Type Beam, and Smart/Digital Load
A stress-tracking instrument was designed according to the bending beam method of Nakamura (11) and the bimaterial strips method reported by Soane (12).
Table 9: Global Bending Beam Load Cells Market by Region for
An Applied Test Systems bending beam rheometer (BBR) was used to measure creep stiffness and m-value (logarithmic creep rate) of rubber modified binders and the control samples at -12 [degrees] C and at -18 [degrees] C.
The specific product segments analyzed are Single Point Load Cells, Shear Beam Load Cells, Dual Shear Load Cells, Bending Beam Load Cells, "S" Type Beam Load Cells, and Smart/Digital Load Cells.
Study Reliability and Reporting Limitations I-1 Disclaimers I-2 Data Interpretation & Reporting Level I-2 CAGR Disparities Between Historic & Current Data I-2 Quantitative Techniques & Analytics I-3 Product Definitions and Scope of Study I-3 Single Point Load Cells I-4 Shear Beam Load Cells I-4 Dual Shear Load Cells I-4 Bending Beam Load Cells I-4 "S" Type Beam Load Cells I-4 Smart/ Digital Load Cells I-4
THI manufactures single-point, tension/compression, shear beam, double-ended shear beam, "S" beam and bending beam load cells, signal conditioners and related instrumentation in a wide variety of materials, with an array of features and performance specifications.
This equipment includes the dynamic shear rheometer (DSR) and bending beam rheometer (BBR).
The maximal bending moment is calculated using bending beam formulas of material strength (Rajput 2007).
the subject of the public contract is the supply of of a comprehensive device for cutting 2d and 3d objects with a broad spectrum of material properties of applying the technology of pure and abrasive water beam with compensation bevel (undercut) and bending beam in both modes cutting, ie 2d i 3d.