Installation work must be performed on de-energized
Identify downed power lines and keep a safe P distance until you are certain that the lines have been de-energized
The cable on a charging station usually receives energy upon connecting to an electric vehicle and once the charge is complete, the cable becomes de-energized
12017, which requires that power circuits "shall be de-energized
before work is done on such circuits unless hot-line tools are used.
The tracer, available in two different kits, combines a receiver and powerful transmitter to locate energized and de-energized
wires, breakers, and fuses.
According to the State National Security Committee, Kurmanov and Junushbayev were among organizers of the protest actions in Jety Oguz district in May-June 2013, when the road to the Kumtor mine was blocked, a substation in Tamga village was de-energized
, clashes with police occurred.
Subsequent coverage includes ground resistance, general hazards, induced voltage due to electric and magnetic fields, de-energized
and live-line work, arc flash, and atmospheric discharge, among other topics.
Plug load energy savings are accomplished when devices are de-energized
or transitioned into a low-power state when not in use, which for many instances, can be determined by whether or not the occupant is in the vicinity of the device.
The CDI failed to make sure that the technician had the proper PPE (rubber insulating gloves, insulated floor mat and face shield) because he assumed the switch was de-energized
Moreover, the use of rooftop solar panels presents additional firefighting challenges, as they cannot readily be de-energized
, even after the primary electrical power to the building has been shut down.
control cable that one of the workers was removing came into contact with a 480-volt energized panel.
When the device was de-energized
, viscosity, pump station power requirements, and pressure drop returned to baseline values after approximately 11 hours.