SDR

(redirected from dimension ratio)
Also found in: Financial, Encyclopedia.
Translations

SDR

N ABBR =special drawing rightsDEG mpl
References in periodicals archive ?
It is designated by standard dimension ratio and noted SDR.
The pressure class rating is a function of both the PE material used and the standard dimension ratio (SDR).
These data were generated using PE pipes of varying sizes ranging from 2 inch (50 mm) to 8 inch (200 mm) diameter and thickness (standard dimension ratio, SDR).
To describe the effect of the standard dimension ratio to dimensionless function Y(a/s), five very common values of SDRs (9, 11, 13.
Pipe shall have a pipe diameter based on ductile iron pipe size (DIPS), a dimension ratio (DR) of 11, and has a minimum hydrostatic design basis of 200 psi with a maximum operating temperature of 74A.
Specifically, one may be interested to know if there is an optimum dimension ratio for the minimum power loss.
Sabic Vestolen A RELY 5924R delivers excellent low sag performance for large-diameter pipes and pressure pipes with a low standard dimension ratio (SDR).
Fabricated elbows are typically derated by one dimension ratio for the pressure rating (for example, when DR 11 pipe is produced into a fabricated elbow, the pressure rating of the elbow is the equivalent of a DR 13.