electroless

electroless

(ɪˈlɛktrəʊləs)
adj
involving a plating process that is achieved by chemical, as opposed to electrical, means
References in periodicals archive ?
In addition to Duralar coatings, CTI provides a range of surface finishing services: electroless nickel/PTFE composite coating (NP3), electroless nickel coatings, black oxide coatings, phosphate coatings, passivation, abrasive blasting, commercial painting and dry-film lube.
Solder Ball Joint Reliability with Electroless Ni/Pd/ Au Plating--Influence of Electroless Pd Deposition Reaction Process and Electroless Pd Film Thickness"
Atotech global experts will join this event and present the following papers at SMTA International technical conference Tuesday, September 19, 2:30 pm to 3:00 pm, Substrates / PCB Technology Session: The impact of deposition thickness on high speed shear test result specifically related to electroless palladium and semi autocatalytic goldThursday, September 21, 8:00 am to 8:30 am, Advanced Packaging Technology Session: Fine line through hole copper filling in VCP for next generation packaging
Carbodeon of Finland has worked with metal finishing specialist CCT Plating of Germany, to develop a new NanoDiamond enhanced electroless nickel plating with significantly improved performance in sliding applications.
The catalyst is immersed in a electroless plating solution(*3) with whatever metal that has been selected for the specific application to form fine electronic circuitry patterns made of various metals with a wire width of 5 um (a micrometer is one-millionth of a meter).
Electroless nickel plating has been commonly used in the firearms trade for more than 30 years.
The seven selections that make up the main body of the text are devoted to leaching gold from spent mobile phone PCBs using greener reagents, electroless displacement deposition of gold from aqueous sources, adsorption of gold on granular activated carbons and new sources of renewable and eco-friendly activated carbons, and a wide variety of other related subjects.
Finally, the company's plating department can apply finishes including tin, silver, zinc, sulfamate nickel, electroless nickel, palladium nickel, and gold.
There were many reports on the fabrication of metal-ceramic composites using a conventional method such as ball milling [8], attrition milling [9], sol-gel [10], and electroless deposition [11-13].
Based on the results obtained from previous studies, electroless nickel/black phosphor coatings have desirable optical properties, and they have wide application in optical collectors.
is Diamond EN, based on electroless nickel with nano-diamond particles.
The electroless and electrodeposition of silver metal onto copper substrate is an important industrial process that is used primarily by the manufactures of printed circuit boards to prevent degradation of exposed copper surfaces (conduction tracks) during the time that elapses between the manufacture of the circuit board and the assembly procedure incorporating the board or component into a finished device.