fixed port

Related to fixed port: Static port

fixed port

Water terminals with an improved network of cargo-handling facilities designed for the transfer of oceangoing freight. See also water terminal.
References in periodicals archive ?
1 million in 2016 mainly due to strong operating results from the terminals in Iraq, Mexico, Honduras, Madagascar, China, Poland and Brazil, combined with the additional benefits of the on-going group-wide cost optimization initiatives, and positive contribution of the new terminal in Matadi, DRC tapered by start-up costs and fixed port lease expense at Melbourne, Australia.
Because you can't turbocharge a fixed port two-stroke, as both inlet and exhaust ports are open at the same time and the inlet closes first.
However, its primary strategic mission is to conduct LOTS operations, which include loading and off-loading watercraft in austere environments where ports are unavailable, damaged, or without adequate fixed port facilities.
Retract cylinder speed that is set at the factory with Fixed port orifice, with no adjustment required.
fixed port and embedded solutions based on the 16 Gbps Fibre Channel standard.
Far too often, access devices are coupled with specialized instruments to overcome hurdles such as limited triangulation, restricted visualization, fixed port placement and limited procedural applications.
soldiers worked today to improve their joint "over-the-shore" capability for loading and unloading ships without a fixed port facility, Seoul's defense ministry said.
The vehicles and their drivers were participating in Joint Logistics Over the Shore, a joint training exercise involving landing and transporting vehicles without a fixed port.
With copper MR J-21 solutions, the connector plugs into the back of high-density RJ-45 panel-mounted cassettes or into a fixed port and straight 1U patch panels, eliminating the need to punch down and route individual copper cables.
The MPF concept was tested and validated during Operation Desert Shield using a fixed port system.
This requires that high-pressure out-let oil pass from the rotating port in the barrel to the fixed port in the port plate.