# internal angle

Also found in: Thesaurus, Encyclopedia, Wikipedia.
ThesaurusAntonymsRelated WordsSynonymsLegend:
 Noun 1 internal angle - the angle inside two adjacent sides of a polygoninterior angleangle - the space between two lines or planes that intersect; the inclination of one line to another; measured in degrees or radiansreentering angle, reentrant angle - an interior angle of a polygon that is greater than 180 degrees
Mentioned in ?
References in periodicals archive ?
53 * 10m), Linoleum, PVA glue, aluminum threshold (strap connecting Linoleum) Doors Fiberboard (box and cloth) Wooden plat (13 * 70) Handle Latch in interior doors with mortise lock door plinth pen pressure PL (32 * 45) Particle boards, paint VDK and plinth PVC plinth plug connector for an internal angle outer corner
As it stands now, there's little choice on the internal angle and only four choices on the orifice size (table at right).
The flow properties of DDGS (including cohesion, effective angle of friction, internal angle of friction, yield locus, flow function, major consolidating stress, and unconfined yield strength) have been studied using the Jenike shear tester.
What internal angle do clock hands make when the time is 3.
Soleimani et al (2012) in a large scale flumestudied the hydraulic behavior of single and multiply jets on a non-cohesive soil, with different densitometry froude numbers and different internal angle of the nozzle (30, 45, 60 and 90 deg).
The device, called a smart probe, obtains XYZ centerline mapping, bend radius, internal angle and misalignments or deformation data for most pipelines--newly installed, live or shut down.
The internal angle sum of a spherical triangle is always greater than 180[degrees], but less than 540[degrees], whereas in Euclidean geometry, the internal angle sum of a triangle is 180[degrees] as shown in Proposition I.
0]* depends on many parameters (granularity, internal angle of friction, etc) and it can be evaluated in function of the coefficient of uniformity of the embankment.
He pointed out that the magnitude of the internal angle change ([phi]) is a function of the internal joint moment (M).
To test the hypothesis that each finlet acts as a single rigid flat plate, we divided each finlet into two separate elements and calculated the internal angle of these elements to each other as an approximation of finlet curvature.

Site: Follow: Share:
Open / Close