piece part


Also found in: Acronyms.

piece part

See: part.
References in periodicals archive ?
compare this with the piece part cost for the same item in China;
The problem is said to be how to assure that each piece part is within the temperature tolerance when it is in the work station, ready for coating.
The press has a Dallas Industries Servo Feed, which will feed a die that measures each part with an analog probe and automatically makes adjustments after each stroke of the press to compensate for run-out of the piece part.
A word on the theory and the philosophy behind the die: The theory is that since slug pulling is the condition where the slug returns to the top of the sheet during the return portion of the punching cycle, and can then interfere with subsequent punching cycles causing damage to the piece part and the tooling, then the best counter to this condition is for the slug to pass through the die and on down into the slug chute with each cycle.
lists the major process advantages of EPC from the designer and user point of view as lower piece part cost, reduced casting weight, improved cosmetics and design flexibility.
Businesses were forced to over-invest in piece part solutions built around systems and devices that either had redundant functionality or were drastically underutilized.
Zero mask charges, NRE charges of less than $50K and a 100K volume piece part price of $6 provides the ultimate in cost efficient system design
Piece part design will usually dictate the selection of the method.
The two trends they saw were a growing customer demand for the zero defect goal in piece part production, coupled with a fundamental change in the manufacturability of rubber parts which resulted directly from improvements in molding machine technology, vice president of sales and marketing Larry Callon said.
With the evolution of REP-NET, a computer command center capable of monitoring and documenting the production of REP presses, your attainment of SPC and consistent piece part quality just became a reality.
Piece Part Approval Process (PPAP), TS16949) that guarantee performance in the rugged automotive environment.
SolidWorks is a powerful and easy-to-use CAD software, useful in designing everything from the smallest piece part to full machine assemblies and manufacturing documentation," Walter Zengerle, Director of Engineering, Z Corporation.