rewet

rewet

(ˌriːˈwɛt)
vb (tr)
to wet again
References in periodicals archive ?
IPS is now certified to test personal care incontinence products according to the following methods: rate of acquisition, rewet, breathability, retention capacity and elasticity.
A heat-treated finish is standard; optional waterproof, rewet and/or flameproof finishes are also available.
Table 2: Details of the samples whose images are used here to illustrate change in microstructure after rewetting Purpose Sample Freeze-drying, annealing, and rewetting information infromation infromation (a), (b) Sample ID Annealing Annealing Freeze-drying temperature time (h) time after rewetting ([degrees]C) and refreezing (min) Rewet RW1 20 3 5 annealed coatings and distinguish elastic and palstic deformation (VF1) RW2 30 3 5 (VF2) RW3 40 3 20 (VF3) RW4 50 3 20 (VF4) Purpose Sample information Image information (c) Sample ID Cryogenic or room Image temperature images location Rewet annealed RW1 Cryogenic Fig.
Once the compost has dried out completely, it is extremely difficult to rewet it again.
Felts originally developed for standard roll or multi-nip shoe presses do not give the sheet surface characteristics, felt life or rewet performance required for high quality printing and writing papers when used in a single nip shoe press.
The material we use for our baskets and containers usually consists of peat, which is difficult to rewet once it has dried out.
However, do not let the soil go bone dry, as it is difficult to rewet.
On the downside, it's more expensive and, if it dries out, difficult to rewet.
We artificially rewet the soil in respiration cylinders on all the agricultural soil plots at three intensities, 25%, 50% and 75% of soil water-retention capacity, once in each of the three cylinders in the plots.
Quality and productivity: Flatter express moisture profiles entering the dryer section reduces the total volume and zone-to-zone water application of downstream rewet actuators, and steam consumption is also reduced in the main dryer section.
As the soils were dried and rewet to a specific moisture content before centrifuging, the effects of varying soil-moisture content and time between rewetting and centrifuging (equilibration time) were investigated.
a back sheet wherein the absorbent core has a dryness index in the range of between about 0 to about 50 gm/180 min, and wherein the dryness index is determined by first measuring the rewet values of an absorbent garment at various time intervals, in which the rewet values are measured for 3 insults of 50 mls each of 1.