temperature unit


Also found in: Thesaurus.
ThesaurusAntonymsRelated WordsSynonymsLegend:
Noun1.temperature unit - a unit of measurement for temperature
unit, unit of measurement - any division of quantity accepted as a standard of measurement or exchange; "the dollar is the United States unit of currency"; "a unit of wheat is a bushel"; "change per unit volume"
degree - a unit of temperature on a specified scale; "the game was played in spite of the 40-degree temperature"
millidegree - a unit of temperature equal to one-thousandth of a degree
K, kelvin - the basic unit of thermodynamic temperature adopted under the Systeme International d'Unites
Rankine - a unit of temperature on the Rankine scale
degree day - a unit used in estimating fuel requirements for heating a building
References in periodicals archive ?
Limited Tenders are invited for Snow surface temperature unit and automatic us snow depth gauge
It is a bench-top, room temperature unit, capable of measuring 1H and 19F nuclei, can perform 1-D and 2-D experiments, has a compact, benchtop size and weight, needs no sample spinning, thus, no compressed gas, and most importantly from a maintenance and cost factor, no cryogens are needed for operation.
The items bar has a refrigerated unit and a room temperature unit.
Specific heat introduces necessary energy for growing temperature of slag unit for temperature unit.
IQ also debuted its new Thermal Couple/ Temperature unit.
While the natural information unit is the bit the temperature unit was chosen as "practical" -this reflecting much of our "existential" status.
One medium temperature unit cooled 17 walk-in refrigerators and 19 under-the-counter units with R-12; its four semi-hermetic compressors were converted to R-409A.
The temperature controller, air dryer and temperature unit are seamlessly integrated and the temperature chuck is specifically calibrated and planarized for use with the Summit 10000 wafer stage.
The S-600, which is a greater-than-25 horsepower single temperature unit with an evergreen engine for use in California
To change from TPE to rubber, users will select this on the interface, turn off the heater bands, turn on the water temperature unit for the extruder, shut off the hopper feed, begin the strip feed, purge out, turn on the platen heat and the system will be ready.
For proper workpiece compensation, the thermal expansion coefficient of the workpiece material is entered by the user; since the material of scale units of the CMM is constant, this expansion coefficient is permanently stored in the temperature unit.
A "parking" characteristic permits the temperature chamber to be located outside the measuring area when not in use, and this allows working with another temperature unit such as Peltier.

Full browser ?