Key statement: Provided is an adhesive composition that provides excellent adhesion between a thermoplastic resin
or a thermoplastic elastomer in which an elastomer component is dispersed in the thermoplastic resin
and a tire by a combination of general-purpose materials, without using any special polymer.
Elium, available worldwide, is the first liquid thermoplastic resin
to be used to manufacture composite parts.
He said the vehicle was built to demonstrate that continuous-fiber-reinforced thermoplastic resin
is an excellent material for automotive suspension and structural components.
We reported that the poor heat-resistant properties of the novel transparent thermoplastic resin
based on noncrystalline nylon were improved by EB irradiation cross-linking .
Chemical maker JNC sets up thermoplastic resin
unit in China
The back layer has at least one layer comprising thermoplastic resin
filaments with a single filament diameter of 7-20 um and a fiber basis weight of 3-40 gsm.
In the method, when at least the sheet made of thermoplastic resin
or a thermoplastic resin
composition obtained by blending the thermoplastic resin
and the elastomer is cut into the predetermined length, the cutting is performed by using an edge tool having a non-sharp edge under a temperature condition not lower than 60[degrees]C and not higher than a melting point of the thermoplastic resin
Patent 9,217,079 (December 22, 2015), "Long Fiber-Reinforced Thermoplastic Resin
Composition Having Improved Impact Resistance and Molded Article Using the Same," Chang Wan Son, Hyeon Don Kim, Eun Seon Jeon, Yong Chun, Ha Kyu Seo, Seung Hyun Lee, and Woongjae Boo (Hyundai Mobis Co.
wherein the thermoplastic resin
of the unsaturated carboxylic acid functionalized thermoplastic resin
is a thermoplastic polyolefin resin, and, wherein the unsaturated carboxylic acid is acrylic acid or methacrylic acid; wherein the carboxylic acid content of the functionalized thermoplastic resin
is greater than 6.
The nonwoven fabric comprises a water-soluble thermoplastic resin
in a proportion of not more than 5% by weight relative to the nonwoven fabric, has an absorbing height of not less than 30 mm as determined at 20.
Key statement: Provided is a thermoplastic resin
composition for the inner liner of pneumatic tires, which has low air permeability and a small percent change in air permeability from fatigue.
Patent 8,889,785 (November 18, 2014), "Production Method of Thermoplastic Resin
Composition, Molded Body, and Light Emission Body," Hiroshi Niino and Mitsufumi Nodono (Mitsubishi Rayon Co.