Wragge dropped crookedly into a chair, and beat her disorderly hands on her unsymmetrical
knees, in utter forgetfulness of the captain's presence and the captain's terrible eye.
Rio de Janeiro -- Excursion north of Cape Frio -- Great Evaporation -- Slavery -- Botofogo Bay -- Terrestrial Planariae -- Clouds on the Corcovado -- Heavy Rain -- Musical Frogs -- Phosphorescent Insects -- Elater, springing powers of -- Blue Haze -- Noise made by a Butterfly -- Entomology -- Ants -- Wasp killing a Spider -- Parasitical Spider -- Artifices of an Epeira -- Gregarious Spider -- Spider with an unsymmetrical
cooling in conventional rotational molding often causes part warpage due to the thermal gradient evident across the part thickness.
Ratchetting strain is the strain accumulation under unsymmetrical
cyclic stress .
The necking regions expanded and even merged on further stretching, resulting in the unsymmetrical
fringe pattern observed in Fig.
5 that the measured results fitted to the Hoffman-Lauritzen equation yields crystallization rates that were unsymmetrical
over the temperatures range between glass transition temperature ([T.
Using a coagulation bath of 45-49% solvent and coagulation bath temperatures ranging from 10 to 70[degrees]C, the fiber cross-sectional shape is best described as nonuniform or unsymmetrical
at coagulation bath temperatures of 10[degrees]C, oval at 45[degrees]C, and nearly circular at 70[degrees]C.
Scud/Shahab designs use kerosene as a propellant and inhibited red fuming nitric acid (IRFNA) as an oxidizer, but the BM-25 reportedly uses unsymmetrical
dimethalhydrazine (UDMH) as a propellant and hydrogen oxide (H2O4) as an oxidizer.
Experimental and theoretical investigation of twin-entry radial inflow gas turbine with unsymmetrical
volute under full and partial admission conditions, Proceeding of GT 2007 ASME Turbo Expo 2007, Power for Land ,Sea and Air http://dx.
Even facial expressions which make the face unsymmetrical
poses a problem for frontalization.
The newness of the Waku Waku Gate, which was created based on Honda's original idea, was expressed by its unsymmetrical
Parts with unequal flanges or unsymmetrical
cutting operations after drawing operation are affected by unbalanced forces because of non-uniform deformation gradients.