Prior to the tests, the patients were directed to perform two trials in each

angular speed to ensure maximum alignment with the test applications.

2016), who observed increasing consumption as the

angular speed increased, at the three evaluated rotations.

the misfire detection index) based on the crankshaft

angular speed or acceleration, and require an optimized threshold setting for the calculated index that clearly identifies all the misfiring cylinder events with the detection rate that meets the regulation requirements.

The more the player prints the ball at a higher

angular speed, the more it has to print a lower initial speed, or to throw at higher angles (the input angles are even higher), both improving less chances of success.

ATO achieves this without introducing the lag related to

angular speed.

The quaternion errors and

angular speed errors are shown in Figures 8 and 9.

Each servo drive is close looped with

angular speed of the wheel of the motion module.

w - net resultant radial force, N; a - width of parabolic portion of the ring face, mm; b - width of the straight portion of the ring face, mm; [delta] (delta) - the inclination of the wedge, degree; c - minimum film thickness, mm; h - oil film thickness which is the function of x, mm; x - the coordinate distance reckoned from the leading edge of the ring, mm; N - number of iterations; P - hydrodynamic pressure, Pa; U - piston velocity in axial direction, m/s; t - time, s; X - Piston displacement, m; R - ring radius, m; [theta] - crank angle, degree; L - stroke length, m; [omega] - the

angular speed of the crank, rad/s; [mu] - viscosity of the oil, cst; [tau] - shear rate, N; Pu - power dissipated, w; F - friction force, N; f - friction coefficient.

According to design of motor vehicle of divided weight the

angular speed ratio is created by the torque transmission from the engine to the unifying energetic element and can be represented as

Figure 1 shows a block diagram illustrating the experimental rig built, in order to test the control algorithms proposed to keep regulated the

angular speed of a DC-motor, in despite of torque perturbations applied to the motor load.

When released, the rotor will precess with the

angular speed [[omega].

Linear velocity of the mobile platform is obtained by multiplying

angular speed [[omega].