colloidal solution

(redirected from Colloidal dispersion)
Also found in: Thesaurus, Medical, Financial, Encyclopedia.
Related to Colloidal dispersion: coarse dispersion
ThesaurusAntonymsRelated WordsSynonymsLegend:
Noun1.colloidal solution - a colloid that has a continuous liquid phase in which a solid is suspended in a liquid
colloid - a mixture with properties between those of a solution and fine suspension
Based on WordNet 3.0, Farlex clipart collection. © 2003-2012 Princeton University, Farlex Inc.
References in periodicals archive ?
Two jets feed one mixer drum, creating a much more turbulent vortex for better colloidal dispersion of solids, resulting in a grout that will last as long as the asset's lifecycle, it stated.
Zeta potential ([zeta]) is a crucial physicochemical parameter the stability of colloidal dispersion [24].
The appearance of turbid milky white stable colloidal dispersion after 20 minutes of time indicates the successful synthesis of polymer microgels.
Bridging flocculation occurs at low concentrations of polymeric thickener in a colloidal dispersion in which a single polymer chain adsorbs on two or more particles and "binds" them together.
The colloidal dispersion was dedoped by N[H.sub.3] (0.5N) solution for 24 hours and then it was centrifuged (6000 rpm) for thirty five minutes, for the separate the oligomers and impurities, the product was washed several times with deionized water.
Density measurements of a colloidal dispersion of NPs have been usually coupled with Hamilton-Crosser mixing model (Pak and Cho 1998) which requires knowledge of particles and liquids concentrations respectively.
These are: lecithin bound to curcumin, a "phytosome" process (e.g., Meriva), curcuminoids/turmeric essential oil/lecithin (e.g., BCM-95), and a curcumin nanoparticular colloidal dispersion (e.g., Theracurmin).
(49.) Goehring, L, Clegg, WJ, Routh, AF, "Solidification and Ordering During Directional Drying of a Colloidal Dispersion." Langmuir, 26 (12) 9269-9275 (2010)
Attributes/comments: Pliotec SA60 colloidal dispersion is fortified with a water-based epoxy to form a 2K coating system.
The surfactant loading required to stabilize a colloidal dispersion is directly related to the available wetted surface of the particle, hence direct measurement of the wetted surface area is critical to formulation development.
Ionic gold salts that are not soluble in water have been prepared in a colloidal dispersion form, but their properties are similar to soluble ionic gold salts.
(3-5,7,8) Less toxic forms of amphotericin B--such as liposomal amphotericin B, colloidal dispersion amphotericin B, and amphotericin B lipid complex--may be more safe.