sander

(redirected from Disc sander)
Also found in: Thesaurus, Encyclopedia.
Related to Disc sander: Sanding Machine

sand·er

 (săn′dər)
n.
One that sands, especially:
a. A device that spreads sand on roads.
b. Such a device together with the truck that carries it.
c. A machine having a powered abrasive-covered disk or belt, used for smoothing or polishing surfaces: a floor sander.

sander

(ˈsændə)
n
1. (Tools) a power-driven tool for smoothing surfaces, esp wood, plastic, etc, by rubbing with an abrasive disc
2. (Mechanical Engineering) a person who uses such a device

sand•er

(ˈsæn dər)

n.
a person or apparatus that sands.
[1620–30]
ThesaurusAntonymsRelated WordsSynonymsLegend:
Noun1.sander - a power tool used for sanding woodsander - a power tool used for sanding wood; an endless loop of sandpaper is moved at high speed by an electric motor
electric motor - a motor that converts electricity to mechanical work
power tool - a tool driven by a motor
Translations

sander

[ˈsændəʳ] N (= tool) (gen) → lijadora f; (for floor) → pulidora f

sander

[ˈsændər] n (= tool) → ponceuse f

sander

n (= tool)Rutscher m, → Vibrationsschleifer m

sander

[ˈsændəʳ] n (machine) → levigatrice f
References in periodicals archive ?
Work auxiliary room with disc sander, Jigsaw, Metalworking center, Deduster, Table saw, Planer.
The first thing I did was cut off two pieces with my bandsaw and shape them on a disc sander.
Rotors were ripped on the table saw, cut to length on the miter saw using stop blocks, drilled on the drill press with an alignment fixture, and rounded on the disc sander.
I use it with my router tabLe, disc sander and orbital sanders, so when I flip one of them on, my shop vacuum also starts up to take care of dust collection.
The application of choice was a tough duo created from the partnering of the Roloc Air-Powered Disc Sander with the Roloc Quick Release System (both by 3M) combining high performance and durability.
Chunks of ice can be shaped and polished with a disc sander.
After an informative introduction, various tools and issues relevant to shop projects are covered including sharpening techniques and station, downdraft workbench, lumber and plywood storage, mobile clamping cart, drill press vise, shop built disc sander, sandpaper caddy, avoiding kickback and binding options, and a deluxe drum sander.
A high-speed disc sander could easily burn the paint if used in a polishing operation.
Sandie Mizerak of Little Sebago Gallery & Frame in Windham, Maine, pointed to her disc sander as the "most indispensable piece of equipment" in her shop.
And a disc sander is one of the quickest ways of removing caked-on paint.
has his flooring subcontractor fill the nail holes in the underlayment, and then sand the surface with a disc sander before installing the vinyl.