H-beam


Also found in: Thesaurus, Encyclopedia, Wikipedia.

H-beam

n
(Building) a rolled steel joist or girder with a cross section in the form of a capital letter H. Compare I-beam
Mentioned in ?
References in periodicals archive ?
Tenders are invited for Estimate for 01 No 99 HP IP Connection to M/s Asara Rice Mil at village Kaundkera Under Gariaband (R) DC Estimate for replacement of 01 no H-Beam Pole,01 No cross Ann & 3 No Top Clmp broken due to Heavy stonn & falling tree branch 33KV Pond Feeder at village Korgaon under Panduka DC Opening date : 03 Sep 2019
It also offers H-Bearing Piles, Checkered H-Beam, Light Sections, Structural Tees (Cut Tees), I-Beams, I-Section Steel for Mine Support (Mining I-Beams), Equal Angles, Unequal Angles, Inverted Angles, Channels, and Sheet Piles.
However, LG claims this is not the case, as they have used an H-beam frame on the phone, that ismade from a "incredibly strong 7000 series aluminum".
[9] analyzed temperature fields during both controlled cooling and air cooling and the microstructural mechanical properties for different parts of an H-beam after it was control cooled for 4.5 s, and the lowest and the highest temperature were measured at the edge of the flange and at the R corner, respectively.
The target, according to Yao, is to produce 600,000 tons a year of wire rods (used for industrial applications) in a facility that will be put up in Candelaria, Quezon; 600,000 tons of steel sections (H-beam, I-beam, angle, channel, sheet pile), and 300,000 tons of plates in a Cagayan de Oro plant.
Then, an example of H-beam is illustrated to apply GA and BP neural network into design optimization in detail.
Tong Ho is now Taiwan's largest supplier of H-beam steel bars by market shares, as well as one of leading makers of ordinary steel bars.
Light weight and easy to maneuver, MAHA USA's Wireless Mobile Columns are the only solid, one-piece H-Beam columns on the market.
In Westboro, a 6-foot, 2,800-pound charred H-beam from the trade center will be incorporated into a new public safety complex when it is built, but plans for that are on hold.
The vehicle features an aluminium block engine, standard automatic transmission, double keyed crankshaft, Manley H-beam connecting rods, low-drag racing brakes and optimised spring rates for the front and rear.
That would increase the price of its mainstay H-beam steel by nearly 5 percent to 66,000 yen.
Other standard features include: 10-18 degree drill angle; triple jaw wrenches with a 12-inch separation; wrenches that travel the full length of the thrust frame; 154,000 foot-pounds of maximum breakout torque, 101,700 foot-pounds of maximum makeup torque, H-Beam type front and rear safety hold down system with struts, and the ability to utilize Range II drill pipe.