inclination angle


Also found in: Thesaurus, Medical, Encyclopedia, Wikipedia.

inclination angle

References in periodicals archive ?
Trimble Groundworks Machine Control System for Drilling gives contractors the ability to easily and precisely drill to the specified location, depth, orientation and inclination angle.
The values of collected drift and drift percentage variation relative to the control, when the inclination angle of the spray nozzles is positioned downwind and upwind in relation to the wind flow direction, are presented in Figure 1.
It can be seen that the deviation between each correction angle and the known inclination angle is less than one degree, and the correction effect is ideal.
Also, by installing the panels with a steeper inclination angle than possible in conventional urban settings (in Switzerland the law requires PV panels to flush with the roof surface), winter production is further increased because the PV surface is more perpendicular to the incoming radiation, taking into consideration that the sun is closer to the horizon in winter than in summer.
Specifically, the present invention provides a pneumatic tire for a motorcycle, characterized in that: the auxiliary belt layer is sectioned into a middle area (Am) overlapping a region where the belt layer is provided and respective side areas (As) each extending beyond the region where the belt layer is provided; the cords in the middle area (Am) extend at an inclination angle ([theta]m) in the range of 70[degrees] to 90[degrees] with respect to the tire circumferential direction; and the cords in each side area (As) extend, in at least a portion of the side area, at an inclination angle ([theta]s) different from the inclination angle ([theta]m) with respect to the tire circumferential direction.
Sacro-horizontal angle, lumbosacral joint angle and sacral inclination angle were measured on the radiographic images.
Researchers evaluated LLA and sacral inclination angle using lateral standing radiographs and LLA was found to be significantly and negatively correlated with age.
The dynamic performance of steering mechanism is closely related with the front-wheel alignment parameters and the alignment parameters are also identified as design variables, including the kingpin inclination angle, kingpin caster, camber.
The Bigger inclination angle enables a larger effective diameter of the tool and will induce the application of less force.
The position of the tool in relation to the machined surface (inclination angle) has a strong impact on the cutting forces [1-3].
As shown in Figure 3, the inclination angle can be adjusted between [theta] = 0[degrees] (vertical) and [theta] = 30[degrees]; in addition, the test tube can incline through different directions with the help of the moveable platform.