ionomer

(redirected from Ionomeric)
Also found in: Encyclopedia.

ionomer

(aɪˈɒnəmə)
n
(Chemistry) chem any of a class of tough thermoplastics with ionic bonding between the polymer chains
References in periodicals archive ?
In addition, this technique is relatively easier to perform than the other techniques that have been described for the same purpose, including using nonabsorbable sutures that were passed through monocortically drilled holes on each side of the R/S [1] or passed through two 4-mm titanium screws on either side of the well, [5] using polypropylene mesh that is fixed with titanium screws, [6] or using ionomeric bone cement for device fixation [7].
Shtompel, "(Bio)degradable ionomeric polyurethanes based on xanthan: synthesis, properties, and structure," International Journal of Polymer Science, vol.
Thus, ionomeric cements were chosen because they are less sensitive to the technique and can be placed in the cavity in only one increment [29].
In general, for ionomeric membranes, the proton conductivity depends on several factors such as the number of available acid groups, polymer structure and morphology, proton mobility and water content [33-37].
(also available as 9201 masterbatch) are comprised primarily of ionomeric zinc salts, which reportedly represent a new class of polyolefin additives with a novel set of performance attributes.
Correr et al., "Influence of environmental conditions on properties of ionomeric and resin sealant materials," Journal of Applied Oral Science, vol.
Ionomers are partially crosslinked ionomeric resins, and perform in peelable seal applications through delamination of the seal/seal interface.
The ionomeric additives, part of the company's Dymalink series, have been tested and shown to improve tensile strength by 10%, heat deflection temperature by 15% and flexural modulus by 30% without significantly adding weight.
Wallmersperger, "Computational models of ionic transport and electromechanical transduction in ionomeric polymer transducers," in Proceedings of the Smart Structures and Materials, Electroactive Polymer Actuators and Devices (EAPAD 05),pp.
The BMR microactuator consists of six (6) quasi-cylindrical Nafion-Pt ionomeric polymer-metal composites (IPMC), and one tubular IPMC connected to a micropump enabling thrust vector control.