carbon steel

(redirected from Low carbon steel)
Also found in: Thesaurus, Acronyms, Encyclopedia.
Related to Low carbon steel: mild steel

carbon steel

n
(Metallurgy) steel whose characteristics are determined by the amount of carbon it contains

car′bon steel′


n.
steel owing its properties principally to its carbon content; ordinary, unalloyed steel.
ThesaurusAntonymsRelated WordsSynonymsLegend:
Noun1.carbon steel - steel whose characteristics are determined by the amount of carbon it containscarbon steel - steel whose characteristics are determined by the amount of carbon it contains
steel - an alloy of iron with small amounts of carbon; widely used in construction; mechanical properties can be varied over a wide range
drill rod, drill steel - carbon steel used for rock drills and dowels
eutectoid steel - a steel that contains 0.9% carbon (the eutectic point); a carbon steel with 0.9% carbon is pure pearlite
hyper-eutectoid steel - a steel that contains more than 0.9% carbon
hypo-eutectoid steel - a steel that contains less that 0.9% carbon
Translations

carbon steel

nacciaio al carbonio
References in periodicals archive ?
Korkut, MH, Gok, MS, "Abrasive Wear Characteristics of Coating Area of Low Carbon Steel Surface Alloyed Through Tungsten Inert Gas Welding Process.
The experimental program was carried out on low carbon steel RSt37-2 (S232 JRC).
LENOX entered the precision circular saw market in 2014 with the launch of theCircTech Precision CM , designed for optimum performance when cutting low carbon steel and mild alloy steels.
Overlay welding of structural steel CT3 with material powders sprayed over the surface and melted by arc between continuously supplied low carbon steel wire CB 08 obtained layers solidifying during tempering at heat temperatures.
At first, material is heated to the temperature of ignition (for low carbon steel approximately 1350[degrees]C).
Low carbon steel alloys are used in this type of application due to its good strength properties and good weldability, which allows the plant to correct imperfections to the castings before heat treatment.
These include aluminum, low carbon steel, high carbon steel, Galfan([R]), stainless steel, galvanized wire and wire made from copper, brass, and bronze.
Tenders are invited for 90 Degrees Elbow To Size: 1/2 Inch Id X 1/2 Inch Id With Internal Threads Material : Low Carbon Steel.
2007) Low carbon steel sheets treated by nitrooxidation process.
Standard clamp materials are zinc-plated, low carbon steel for stampings and stainless steel for pivot points.
Low carbon steel water-cooled permanent molds with a wall thickness of 1-1.