As a longtime franchise distributor of State of the Art, New Yorker Electronics supplies its complete line of Military Grade and Standard Grade Chip Resistors, Zero Ohm Jumpers & Resistors, Military Jumpers, Untrimmed Resistors, Space Level Resistors, Silicon Resistors, Resistor Networks, Fixed Chip and
Coplanar Attenuators, and other High Power and High Frequency Resistors.
Unlike traditional BTB pin jumpers--which are made to mate with traditional connectors and are thus closed on the back end, limiting the depth to which a pin can travel and restricting the amount of BTB or module-to-module mating tolerance that the jumper can absorb--the new 10-9296 Series BTB pin jumper and contact combination absorbs the maximum amount of component and assembly tolerances during the mating process, effectively eliminating the PCB and housing tolerance stack-up issues common to traditional connector systems in linear and
coplanar applications.
"Technologies for RF Systems" offers details about passive RF components, capacitors, inductors, resistors, coaxial, and microstrip lines as well as
coplanar waveguide.
The mTenna PLUS increases throughput by combining the receive connection of two to four ODUs, delivering up to 5.4dB of effective RX gain and signal-to-noise improvement for four
coplanar antennas.
The QCA circuits are conceived by three sorts of crossover methods, namely,
coplanar, multilayer, and logical crossing.
According to the observation of the relationship between the failure surface and the shear stress surface and the joint surface, the failure modes of ubiquitous-joint rock-like specimens can be generally classified into four categories:
coplanar shear failure (failure mode I), shear failure along the joint plane (failure mode II), shear failure along the shear stress plane (failure mode III), and similar integrity shear failure (failure mode IV).
A
coplanar waveguide (CPW) fabricated on a dielectric substrate was first demonstrated by C.
Also, a printed LPDA antenna fed by a
coplanar waveguide (CPW) is presented in [11, 12].
Kamaya [7, 8] evaluated the growth behaviour and the SIF of interacted
coplanar and parallel semi-elliptical surface cracks through finite element analysis quantitatively.
The transmitter's SuperModule platform and
coplanar design reduce potential leak points by 50 percent compared to traditional designs, ensuring the highest differential pressure measurement accuracy, field reliability and safety.