adsorbent material

Also found in: Thesaurus.
Related to adsorbent material: absorbent material
ThesaurusAntonymsRelated WordsSynonymsLegend:
Noun1.adsorbent material - a material having capacity or tendency to adsorb another substance
sorbent, sorbent material - a material that sorbs another substance; i.e. that has the capacity or tendency to take it up by either absorption or adsorption
References in periodicals archive ?
They have used the Langmuir and Freundlich isotherm model to check the equilibrium behavior of the system, the main advantage of this technique is the reuse of adsorbent material.
United States-based CycloPure, Incorporated has launched its first adsorbent material, CD-PFAS, that removes perfluorooctanoic acid and perfluorooctanesulfonate from water to below Federal and State limits.
Therefore a search for a more cost effective adsorbent material is of immense interest in waste water treatment.
The main aim of this study was to investigate the possibility of using powdered eggshells as adsorbent material.
It's the best adsorbent material that you can think of.
This has the disadvantage, though, that only selective contact exists between the adsorbent material and the component.
It will establish state-of-the-art testing procedures, develop reference materials for adsorbent material testing, create an online data base of adsorbent material properties and serve as an impartial testing and validation facility.
m] when compared with other adsorbents used on MB dye (Table 5) showed that raw melon husk could also beta good adsorbent material for MB.
Among specific topics are the effect of milling time on the production of herbal nanopowders, flow behavior in the resin infusion of a glass-fiber-reinforced polymer wind turbine blade, mechanical properties of chitosan-modified montmorillinite-filled tapioca starch nanocomposite films, fabricating and characterizing ceramic membrane by a gel-cast technique for filtering water, and zero-valent iron supported by nano-clay as an efficient adsorbent material for arsenic.
34% for thorium at initial thorium concentration of 1 mg/l, so adsorbent material was found to be efficient to thorium removal from SSAS and wastewater.
The tests ranging the mass were carried out to verify the ideal adsorption conditions, using increasing amounts of adsorbent material (0.