As an example, one #50 Super Stainless chain has a comparable maximum allowable load
(MAL) to one #50-6AS (6-strand) roller chain.
Component (failure mode) capacity (kips) 2 by 6 No.
Photo shows a screenshot of Globe SMS response to customers trying to share more than the allowable load
[Q.sub.tc] = total allowable compressive capacity; [Q.sub.s] = allowable capacity due to side friction; [Q.sub.b] = allowable capacity due to end bearing; [f.sub.s] = allowable load
transfer due to side resistance at depth z; dA = differential area of the perimeter along sides of drilled shaft over the penetration depth; [q.sub.b] = allowable unit end bearing capacity; and A = bottom area of pier.
The NDT plate-loading test on the surface of a runway pavement indicates an actual allowable load
for a single wheel leg.
Rooftop solar not only has limitations due to the size of the roof, but also due to the age of the roof and allowable load
the roof can safely handle.
It exceeds the maximal allowable load
of the gear of linear motor (150 N), thus the modernized grouping device cannot work in such a regime.
VIDA - A community meeting on the reduced allowable load
limit on Goodpasture Covered Bridge will be held at 1 p.m.
Check both your maximum allowable load
and tyre pressures.
The iVISOR mentor QGVA provides the operator with a graphic display of the crane and the current load and geometric information, including the actual and allowable load
, boom length, boom angle and load radius.
Therefore, as shown above, extending the flaps not only reduces the allowable load
factor to 2g from 3.8g for a Normal category airplane with flaps up, but also reduces the airplane's gust tolerance to 25 fps from 50 fps when the flaps are retracted.
For a given static allowable load
, the ultimate permanent settlement increases with the amplitude of the cyclic load.