angle plate


Also found in: Encyclopedia, Wikipedia.

angle plate

n.
A right-angled metal bracket that is used on the faceplate of a lathe to hold the pieces that are being worked.

angle plate

n
(Building) a steel structural plate, esp one in the shape of a right-angled triangle, used to connect structural members and stiffen frameworks
References in periodicals archive ?
In general, the typical failure will result in a varus deformity (Figure 7) and these complications are typically treated with exchange intramedullary nailing or fixed angle plate constructs with or without bone grafting [14].
All plates are designed to accept both 2.0 mm and 2.5 mm locking and non-locking variable angle plate screws.
Heat transfer was observed using the different parameters of film Reynolds numbers (200-2000) in the high angle plate and low angle plates.
The mold opening has a tapered entry into the runner system to create a damming effect to hold the surface oxides and impurities in the pouring basin and an angle plate is added to the other half of the mold directly across from the pour cup to prevent metal spillage.
deliver, Tolerate and build tables 1 piece: Variant 1: Straight table top 1 400 x 800 mm (height adjustable) 6 pieces: Variant 2: Straight table top 1 600 x 800 mm (height adjustable) 15 pieces: Variant 3: Straight table top 1 800 x 800 mm (height adjustable) 17 pieces: Variant 4: Table top as angle plate (about 45%) 1 600 x 800 mm with left leg (height adjustable) 16 pieces: Version 5: Table top as angle plate (about 45%) 1 600 x 800 mm with leg right (height adjustable) 92 pieces: Version 6: Table top as angle plate (about 45%) 1 800 x 800 mm with left leg (height-adjustable) 113 pieces: Version 7: Table top as angle plate (approx.
Machining begins when a 540lb beryllium billet is fixtured vertically onto an angle plate on one of the eight Mitsui machines.
Tenders are invited for repair of curb angle plate of cone roof ag tank tk05(12 m dia x 7.8 m height, capacity 838 kl ) at muzaffarpur depot.
If large, rather flat work is to be machined, an angle plate is used.
Tenders invited for Cast iron box angle plate & angle plate grade -1
Components within the system include precision hardened-and-ground rotating elements; V-blocks; mounting blocks; clamps; angle plate; and bedding supports.
Contract awarded for 1) 6005ns-supply of sea saw made of ms pipe angle plate size 6~.5" feet x 6~ feet x 2~.5" feet frame of 60 mm, 48 mm, 42 mm x 27 mm (ms) pipe bearing bush derail type ms seat sns 204 make - swing n slide no.