anolyte


Also found in: Encyclopedia.

anolyte

(ˈænəˌlaɪt)
n
(Electronics) the section of an electrolyte that is around or attached to the anode
References in periodicals archive ?
During the last batch, anolyte's COD and dissolved organic carbon (DOC) were determined to quantify the amount of organic matter removed by the system and the coulombic efficiency ([C.sub.E]) was determined for this batch cycle using the resistance producing the maximum power density.
Alonso, "Measurement of the steady and non-steady-state chloride diffusion coefficients in a migration test by means of monitoring the conductivity in the anolyte chamber.
The fuel used as the anolyte is a mixed 0.1 M glucose, 0.1 M NaCl, and 0.1 M PBS pH 7 solution.
Electrochemical impedance spectroscopy (EIS) and Cyclic Voltammetry (CV) was employed to evaluate the heterogeneous electron transfer, electrode/electrolyte interfacial phenomena, current density and charge storage behav-iour of different anolyte. Both CV and EIS measurements show better performance of the inoculated PANI coated electrode in the presence of NR.
Tenders are invited for Hydranal Coulomat Ag, Reagent For Coulometric Kf Titration (Anolyte Solution)
Advantages: Both types of ECA solutions (anolyte and catholyte) have been reported to be effective for the treatment of cutaneous and mucous infections as well as for posttraumatic and postoperative suppurative complications, and purulent surgical disease.
The loaded organic is scrubbed with the diluted anolyte from nickel electrowinning to reduce calcium loading and, in turn, gypsum precipitation.
The company markets andsells its anolyte disinfecting solution under the Excelytebrand name, which is produced by the company's proprietaryEcaFlo equipment that utilizes an electrolytic processknown as electrochemical activation to reliably produceenvironmentally responsible solutions for cleaning, sanitizing and disinfecting.
The Company markets and sells its anolyte disinfecting solution under the Excelyte brand name, which is produced by the Company's proprietary EcaFlo equipment that utilizes an electrolytic process known as electrochemical activation to reliably produce environmentally responsible solutions for cleaning, sanitizing and disinfecting.
The conditioning of the electrolyte was controlled using anolyte (2N NaOH) and catholyte (1N HN[O.sub.3]).
The spirulina biosolar cell was placed under a xenon light source with the distance of 22 cm to the surface of anolyte. Photoelectric conversion performance of the solar cell was detected at 28[degrees] C under xenon lamp by electrochemical workstation.
This issue was taken up and sorted out using different combination of anolyte and catholyte streams.