bridge rectifier


Also found in: Encyclopedia.
Related to bridge rectifier: capacitor

bridge rectifier

n
(Electrical Engineering) electrical engineering a full-wave rectifier consisting of a bridge with a similar rectifier in each of the four arms
References in periodicals archive ?
To fix the low voltage AC supply and convert it into DC, a bridge rectifier configuration is often used.
Tenders invited for Single & three phase bridge rectifier module
In existing practice, the AC power supply system is mainly used, and for the implementation of adjustable electric drives in crane installations, controlled rectifiers with DC motors or VFDs based on a two-stage frequency converter with an independent voltage inverter, having an uncontrolled, controlled or active bridge rectifier are used.
Good-Ark is one of the largest diode, rectifier and bridge rectifier manufacturers in the world.
George in 1963 using an array of 28 half-wave dipole-receiving antennas, each of which was connected to a bridge rectifier made using four 1N82G point-contact semiconductor diodes [3].
The full wave bridge rectifier uses four diodes arranged in a bridge circuit to give full wave rectification without the need for a centre-tapped transformer.
By modeling a basic diode and using a standard bridge rectifier circuit example, this paper illustrates important methods and considerations for modeling and analyzing the advanced worst-case performance of electronic systems.
At lower powers it is possible to use other solutions, such as a diodes bridge rectifier connected in cascade with a DC-DC Boost converter [3].
Specifically designed for the harsh conditions of traction applications, the frequency inverter is equipped with the latest generation of insulated-gate bipolar transistors (IGBTs) for voltages up to 6.5 kV -- and a DC link with a 12-pulse bridge rectifier, with 18-, 24- or 36-pulse rectifiers available as an option.
i.e: a Thyristor bridge rectifier fed DC motor drive; a bank of twenty CFLs per phase, 23 watt each; CFLs under distorted mains voltage.
Specifically designed for the harsh conditions of traction applications, the frequency inverter is equipped with the latest generation of insulated-gate bipolar transistors (IGBTs) for voltages up to 6.5 kV - and a DC link with a 12-pulse bridge rectifier, with 18-, 24- or 36-pulse rectifiers available as an option.