centroidal

centroidal

(ˈsɛntrɔɪdəl)
adj
of or relating to a centroid
Collins English Dictionary – Complete and Unabridged, 12th Edition 2014 © HarperCollins Publishers 1991, 1994, 1998, 2000, 2003, 2006, 2007, 2009, 2011, 2014
ThesaurusAntonymsRelated WordsSynonymsLegend:
Adj.1.centroidal - of or relating to (especially passing through) a centroid
Based on WordNet 3.0, Farlex clipart collection. © 2003-2012 Princeton University, Farlex Inc.
References in periodicals archive ?
2012), which uses centroidal Voronoi tessellations, primarily hexagons, to discretize the globe into grid cells (Fig.
From the figure, it is noted that the centroidal distance from the neutral axis is propotional to (t/2), therefore centroidal distance equals [delta](t/2), where [delta] is a scalar constant and it is assumed to be the same while calculating the centroidal distance for the neutral axis shifted case also.
where disp([x.sub.i]) is the displacement of one node along the beam centroidal axis in one direction, the superscript "ANSYS" refers to the deformation value from ANSYS simulation, and "iFEM" refers to the predicted value computed from iFEM; MER and RMS indicate the maximum error and root-mean-square error of deformation reconstruction, respectively.
In addition, the use of the plastic centroidal axes of the cross section as the reference axes of loading guarantees the convergence of solution in the iterative process.
By using the generators of centroidal Voronoi tessellations (CVT) as the starting point, as suggested in [33], the initial solutions can be more evenly distributed throughout the high-dimensional problem space and improve PSO performance.
The radius of centroidal axis of the curved cantilever beam is R = 100 mm.
Rhythmic grouping creates centroidal time, which is associated with the centered self and emotional expression.
The displacement where the sudden drop in load is observed during the test was used as the reference point to calculate the fracture strain at the centroidal element from the CAE model.
They can be divided into three basic groups of methods: links, centroidal and Ward's (Ward 1963).
[11] devised the feature "centroidal distances": the distance between the geometric centroid of a lesion and the brightness centroid.
[d.sub.p] is the distance between the centroidal axis of the steel sheeting and the extreme fibre of the composite slab in compression (mm).
This element allows using different unsymmetrical geometry at each end and permits offsetting of the end nodes from the centroidal axis of the beam.