4 Fill deep gouge with color matched wood putty, or by mixing a bit of sawdust and colorant with epoxy glue
To build your own beautiful utility knife, you'll need a full-tang blade blank (see Photo One, Page 55) without a bolster or finger guard, wood for your handle scales (the halves of the handle that you'll rivet to each side of the tang), some epoxy glue
, and a handful of brass pins or cutlery rivets.
In a hurried attempt to fix it, the workers applied too much epoxy glue
, leaving a visible crust on the relic.
In an attempt to fix the mask quickly, the museum workers tried to secure it back on in a rapid repair job with epoxy glue
The sloppy reattachment provoked outrage and ridicule worldwide, however in January, the antiquities ministry announced with restoration expert Christian Eckmann that the epoxy glue
could be removed and the famous antique could be restored.
The blue and gold braided beard on the burial mask of famed pharaoh Tutankhamun the ancient Egyptian boy king, was hastily glued back on with epoxy glue
, damaging the relic after it was knocked during cleaning, conservators at the Egyptian Museum in Cairo said on Wednesday.
Absolutely no tar-based substances, epoxy glue
, fiberglass resin, two pret varnishes, noncorrugated cardboard (such as carpet tubes or barrels) or corrugated cardboard that is bonded to other materials.
The researchers had artificially infected the eggs by poking a small hole in the top of each, injecting the Salmonella into the egg via a glass syringe, then sealing the hole with quick-setting epoxy glue
The horizontal beams that support the bridge roadway have developed tiny cracks at both ends of the bridge, and a contractor will use giant steel rods and a lot of epoxy glue
to stop the cracks from getting bigger, said Steve Templin, an assistant project manager with the Oregon Department of Transportation.
If an item has no natural hanger, fix a jump ring to it with Superglue or epoxy glue
Wilson noted that once gabbro rocks were positioned on the sea bottom of the relocation area from barges, the newly harvested corals were attached to the stone base using eco-friendly, two-part epoxy glue
which set within roughly half-an-hour.
Place epoxy glue
around the tubing in the hole to make a nice seal.