foam core


Also found in: Encyclopedia, Wikipedia.

foam core

also foam·core  (fōm′kôr′)
n.
2. A core, as in a boat hull, made out of solidified chemical foam or a similar lightweight material.
Mentioned in ?
References in periodicals archive ?
The pillow's product description reads: "This Anti Snore pillow from Silentnight has an ergonomically designed foam core to position the head in such a way as to minimise snoring.
The test results demonstrated that the bending strength and stiffness of sandwich panels increased significantly with an increase in the foam density; meanwhile, a considerable horizontal slip occurred between the top face sheet and the core due to the low toughness of the foam core. Prakash et al.
Foaber also has an expanding foam core which allows the product to recover from any teeth indents after play.
It features a dual-wall exterior, extra-thick polyurethane foam core and freezer-grade O-ring.
Tenders are invited for Quotation Call for Supplying, fitting, fixing, installation prefabricated shelter room of internal size 23%xll% and height 10% (The roofing will be of 30mm sandwich panels thick constructed along with polyurethane foam core, having density 40+2 kg/cum.
While matte board or foam core might work well for a temporary display, I thought that they would be too flimsy for my permanent door application.
Shell layer thickness and foam core thickness were measured.
On the opposite side of the cube mold, the foam core is sheathed with solid PET, generating the outer shape and thread of the preform.
PMI Foam Market and Other High Performance Foam Core Market by Type (PMI, PES), by Application (A&D, Wind, Sporting Goods, Transportation), by A&D Sub-Application (Interior, Exterior), & by Region - Global Forecast to 2021
Structurally, both models incorporate roll-formed, galvanized steel framing and an endurance-tested foam core continuously bonded to the frame surface with a flexible, nonflammable adhesive.
JSP has developed and optimized a blow-molding process that combines traditional blow molding with an injection-molded particle foam core. This process, called Foamcore, utilizes traditional blow-molding equipment combined with a particle foam injection unit to produce a composite blow-molded part with a solid foam core.