hardface

hardface

(ˈhɑːdˌfeɪs)
n
an uncompromising person
Collins English Dictionary – Complete and Unabridged, 12th Edition 2014 © HarperCollins Publishers 1991, 1994, 1998, 2000, 2003, 2006, 2007, 2009, 2011, 2014
References in periodicals archive ?
Its specialty services include machining, cladding, fabrication and corrosion resistant alloy welding and hardface welding.
In extreme cases of root wear, the sides of the flights can become washed out, leaving little substrate to support the welded hardface inlay, as seen in Fig.
The impact energy decreased as corresponding decreased in the thickness of the hardface. It has been observed that 2mm hardfaced aluminium (sample 3) has higher impact energy than the other 1mm and 1.5mm thickness.
"The crusher, demolition and pulverizer jaw sets are equipped with replaceable teeth that eliminate the need to build up and hardface and are fast and easy to change in the field, resulting in 10-15 percent more production time," she says.
Protective Layer choices that wind, rain and snow at bay include the APX Hybrid Jacket, with Polartec Hardface exterior, for quiet that's abrasion-, fade-and water-resistant.
It features Polartec[R] Hardface[TM] technology for quiet, water resistant wear; Hardface shoulders, elbows, back and hem; fleece-lined torso and underarms; an abrasion-resistant panel down the back for quiet movement against noisy tree bark; articulated elbows for freedom of movement; a zipper cuff that cinches the sleeves tight so there's no string interference; two lined hand pockets; adjustable draw cord hem; and sleeves built for frill range of motion.
Morbark parts were sent to the division to test the ability of the robotics system to hardface the cutters.
The laser's high power density permits fast heating and cooling rates which can be used to hardface, remelt, or structurally change materials in a narrow or limited area, producing new types of surfaces with improved properties.
That means the most hardface a welder can deposit on the base metal in one hour is 60 percent of 10 lb.
This facility is now being used to further develop the process, optimise the coating chemistry and hardface full scale components with wear and corrosion characteristics that will reduce costs and significantly increase the profitability of steel making in South Wales.