helix angle


Also found in: Thesaurus, Encyclopedia, Wikipedia.
Related to helix angle: Lead angle
ThesaurusAntonymsRelated WordsSynonymsLegend:
Noun1.helix angle - the constant angle at which a helix cuts the elements of a cylinder or conehelix angle - the constant angle at which a helix cuts the elements of a cylinder or cone
angle - the space between two lines or planes that intersect; the inclination of one line to another; measured in degrees or radians
Based on WordNet 3.0, Farlex clipart collection. © 2003-2012 Princeton University, Farlex Inc.
Mentioned in ?
References in periodicals archive ?
Similar to spur gears, helical gears are applied at varying forces at the speed of a rotating axle with their teeth aligned at the helix angle. This inclination helps to take the axial thrust in one direction, which enhances the contact area due to the larger teeth length as compared to a spur gear of same width.
Today's highly advanced and integrated designs of gear grinding machine allows the operator to enter the parameter such as helix angle, pressure angle, module etc.
This article provides a methodology for predicting the bone temperature elevation during drilling and to gain a better understanding of the influences of the point angle, helix angle and web thickness of the drill bit.
It was necessary to determine the width of space, the helix angle and many other parameters which would be difficult to obtain by other means.
Such support system is suited to both positive and negative nominal thrusts (with a consistent choice of the helix angle of the spline coupling) as well as transient loading conditions.
The company's hydraulic rifling machine utilizes a CNC machined twist bar with a helix angle that matches the twist rate requested by the customer.
where [beta] denotes the helix angle, [[psi].sub.j] represents the pitch angle between the jth tooth and the (j - 1)th tooth, R is the radius of the cutter, and [OMEGA] represents the spindle speed.
The one mystery is the helix angle; its complexity is due to its competing requirements, such as a steep angle to resist back pressure flow and a shallow angle to provide the least tortuous path for drag flow.
In this experiment, the cutting tool is a hard alloy material of the ball-end mill; the milling cutter helix angle is 30 degrees, whose diameter is 10 mm.
The stability lobes plotted in figure 2 are generated for a 1/2 inch diameter end mill with two teeth, a helix angle of 20[degrees], and a radial depth of cut of 0.8 mm.
In experimental studies, cutting parameters cutting speed, workpiece speed, feed rate, depth of cut and helix angle of cutter is used.