The envelope contained a sheet of elegant, little,
hot-pressed paper, well covered with a lady's fair, flowing hand; and Elizabeth saw her sister's countenance change as she read it, and saw her dwelling intently on some particular passages.
While painting the final image--for which I use watercolours, sable brushes and smooth
hot-press and cold-press paper--I work with a mix of colours which are consistent with the specimen, and a range of techniques like tempera, to carefully describe the unique beauty of the specimen as well as its scientific botanical structure.
Hot-press juice production involves adding a pectolytic enzyme to break down naturally occurring pectins and uses paper pulp or rice hulls as press aids to facilitate extraction of juice.
Our previous work showed the tensile strength of the electrospun poly(vinylidene fluoride) (PVDF) membranes could be sharply increased by the continuous
hot-press (10), but with out-of-order fibrous structure of the nonwoven, the
hot-pressed membranes were still needed to improve in order to meet the demand of high quality filtrations or battery separators.
The researchers mixed the nonmetal materials with a few additives and pressed them with a
hot-press former, creating a nonmetallic plate (NMP).
It can also be used for pultrusion,
hot-press forming, winding, and braiding.
We study the crystalline features of the materials using
hot-press experiments and DSC.
A new generation of vacuum presses from Merva Systems of Germany (with offices in Burlington, Ont.) is suitable for both cold-press and
hot-press molding of low-pressure molding compounds (LPMC).
Two moisture gradients exist in a particleboard mat during the
hot-press cycle: one of increasing MC from the hot surfaces to the core and another of decreasing MC from the middle of the mat to the edge (Strickler 1959).
In this study, a novel continuous
hot-press post-treatment process was applied to the electrospun PVDF membranes to improve their mechanical properties.
Other possible applications include
hot-press molding, RTM, and filament winding.
2000, Wang and Winistorfer 2000a, 2000b) used a radiation based in-situ density monitoring system mounted to a laboratory
hot-press to measure density changes during the hot-pressing of OSB mats.