M2 PRESSWIRE-August 6, 2019-: Hot-Work
Die Steels Market To Witness Extensive Growth Owing To Rising Chemicals & Materials Industries Till 2028 : Radiant Insights, Inc.
To minimise the time that operators must spend in the hazardous area performing routine maintenance, sensor modules can be "hot-swapped" without a hot-work
AMI-SIL silica fabrics are third-party-certified and comply with the ANSI/FM 4950 performance-based standard for hot-work
This is of wider significance as it demonstrates that metalworkers had already nearly two millennia of experience to hot-work
meteoritic iron when iron smelting was introduced," the researchers concluded.
Mold inserts are generally made of corrosion-resistant chrome steel, but ejector pros are usually made of hot-work
steel, which is not corrosion resistant.
There are many shipyard related programs like dry-dock topside safety, hot-work
and tank entry that operational sailors have little experience with.
problems don't have to plague a ship's availability if you follow the example set by the crew of USS Carl Vinson (CVN-70) during one of their complex overhauls.
There are reasons why ships turn off the smoking lamp during fuel movement and why they also set boundaries when doing hot-work
. It's because mishaps have occurred in the past.
FM Global Approval Standard 4950 has been coined as its new "hot-work
standard" and was developed as a result of an extensive study into the causes of industrial hot-work
loss incidents along with FM Global's insurance clients.
New additions to the standard catalogue include a chrome-vanadium, cold-work 1.2210 steel; unalloyed tool steel 1.1730; corrosion-resistant, fully hardened steed 1.2083; standard hot-work
steel 1.2343; high-chromium tool steel 1.2379; special fully hardened steel 1.2767; and a quenched and tempered tool steel in a 1.2550 grade and 1.2842 grade.
Both tanks were certified gas-free by the shipyard gas-free engineer, but the other tank wasn't certified "safe for hot-work
." Two pipefitters were working in the second tank when residual fuel in it ignited.
Does this requirement apply only to hot-work
, or to any kind of work?