inlet valve


Also found in: Encyclopedia, Wikipedia.
Translations

inlet valve

nvalvola d'aspirazione
References in periodicals archive ?
Tenders are invited for Supply of Spares for deutz engine Piston Ring O/S (33-4/1) 0202098/0202089/04232466 Piston Assy O2233072/0615610000/04232448 Lub Oil Pump 02130385/04234146 Bush 03371846/04156548 Valve Guide 02232528/04235374 Cylinder Head 02233043/04232889 Inlet Valve 02137301/04159136
The supplied fuel is sucked by the inlet valve as the plunger descends.
An example of Chatten's patented invention uses a simple co-axial planetary gear mechanism to provide "infinite discrete control of all the valve events" including the exhaust valve opening (EVO), exhaust valve closing (EVC), inlet valve opening (IVO) and inlet valve closing (IVC).
Customers should check to see if their toilet features an illegal inlet valve that, when combined with a blue toilet block, will result in blue toilet water being siphoned back into the kitchen tap following a loss of supply.
It stated: "The regulations require the vertical dimension of the air gap to be 20mm or twice the internal bore diameter of the pipe feeding the inlet valve, whichever is the greater.
Table 1: Development of cam profile Description Inlet cam Angle Existing cam data Inlet valve opening 44.
New features, such as a redesigned water inlet valve and graphical software on a touchscreen controller, make the system even more powerful.
With a dedicated inlet valve and a dedicated exhaust valve, a single MCD can control upstream and downstream flows, as well as positive pressure or backpressure in both open and closed systems.
In fact, sudden increase in pressure caused to close the inlet valve when sparking and the produced gases goes inevitably outside the engine and created a thrust force with striking the ambient molecules.
As the tyre rolls, the deformation of the tyre flattens the tube, pushing air through an inlet valve.
The inline mixer acts like a pump and recirculates the liquid; when the solids inlet valve is opened, the rotor draws powders into the incoming liquid stream and expels the resulting dispersion through the stator openings at high velocity.
The pump features a clutch with a continuous duty throw-out bearing to allow extended idle while in neutral, and a suction inlet valve to suspend charged flow during drill rod makeup/breakout.