input signal


Also found in: Thesaurus.
ThesaurusAntonymsRelated WordsSynonymsLegend:
Noun1.input signal - signal going into an electronic systeminput signal - signal going into an electronic system
signal, signaling, sign - any nonverbal action or gesture that encodes a message; "signals from the boat suddenly stopped"
References in periodicals archive ?
As shown in Figure 4, the dynamic range of the PGC scheme increases with the decrease in the input signal frequency.
For intermediate stages, output signal probability for each faulty gate is computed based on its input signal probabilities and reliability function.
Having as incident signal the input signal to the system, that is, an acoustic impulse, and as reflected signal, the object's impulse response (reflections); and bearing in mind that the acoustic impedance is the ratio between pressure and volumetric rate, we may relate the impulse response to the impedance, as shown ahead.
2, it can be seen that the input signal is applied to the transistor pair [T.sub.1] and [T.sub.2], and the gain control signal is connected to transistors [T.sub.3], [T.sub.4] and [T.sub.5].
From table I, it can be observed that the input signal allowed being with 0.7V maximum swing around the reference voltage.
Analog oscilloscopes displayed waveforms directly, but digital oscilloscopes use high-speed analog-to-digital converters (ADCs) to sample the analog input signal and convert the signal amplitude at each sampled point into digital values.
The MPC uses a 4~20mA or 0~10VDC input signal to automatically adjust the actuator stroke.
A fibre adaptor for use with the Yokogawa AQ6370 series of optical spectrum analysers (OSAs) is designed to enhance the sensitivity, dynamic range and level stability by reducing the divergence of light emitted from the input fibre and increasing the input signal to the OSA by 5dB.
An Auto Energy Saver feature automatically switches the projector to quiet mode when no input signal is received for one minute.
The operator can turn the EC-E on or off manually using the integrated slide switch or remotely reset the breaker via an input signal. The EC-E series comes in three versions.
The input signal, including noise (white noise) is amplified by an adjustable gain , AC coupled amplifier , in order to match it more closely to the optimum input signal range of the PSD (phase-sensitive detection).
Able to respond to input signal changes in 5 milliseconds, the drive covers a 1/2 to 3 HP range.