Included is a rubber composition for tires, including: a rubber component; a phenylenediamine antioxidant; and a masterbatch, the masterbatch containing a specific nonionic surfactant and a silica having a BET value of 40-250 [m.sup.2]/g at a mass ratio
of 1:5 to 1:0.15, the rubber component containing a diene rubber in an amount of 70-100% by mass per 100% by mass of the rubber component, the rubber composition including, per 100 parts by mass of the rubber component, 1.0-10.0 parts by mass of the phenylenediamine antioxidant and 0.1-5.0 parts by mass of the nonionic surfactant introduced in the form of the masterbatch.
"Also, younger children have a higher surface area to the mass ratio
. Hence there is a greater rate of heat absorption in hot environments," he said.
To the base mixture prepared in such a manner, a 20 wt% aqueous solution of sodium acrylate was added at a mass ratio
of 1:1 and 1:2 and again was vigorously stirred on a magnetic stirrer for 5 min to obtain a transparent solution.
Muscle mass ratio
(MMR) is the percentage of total muscle mass divided by body weight, where <22.1% is defined as severe sarcopenia and 22.1%-27.6% is defined as mild sarcopenia in female patients and <31.5% is defined as severe sarcopenia and 31.5%-37.0% is defined as mild sarcopenia in male patients (12).
Finally, 10wt% Ce/ TiO2-palygorskite catalysts were prepared and denoted as Ce/TiO2-Pal (x), where x corresponded to the mass ratio
between TiO2 and Pal.
The mass of the coil assembly is 19 lbs., which gives a force to moving mass ratio
Patent and Trademark Office related to the use of pharmaceutical formulations of diazoxide and diazoxide choline to increase lean body mass and the lean body mass/fat mass ratio
in patients with Prader-Willi syndrome.
The effect of temperature (50, 60, 70, 80 [degrees]C) on the yield of the extract oil and concentration of the basic nitrogen and phenolic compounds at a mass ratio
of the extracting agent to oil of 1:1 using DMF as the extracting solvent was investigated, the results are shown in Figures 3 and 4.
Body weight, BMI, fat mass, lean mass, and fat/lean mass ratio
were independent variables.
In fact, the natural logarithm of the Sun-to-electron mass ratio
is close to an integer number:
The mass ratio
of each component in these slurries was A : B : AA : BB : C = 5 : 5 : 3 : 3 : 3.
To determine their drug loading capability, the MNPs were mixed with Dox at various mass ratios
. As shown in Figure 2, the loading efficiency of Dox-MNPs decreased with the increasing mass ratio
of Dox to MNPs.