mild steel


Also found in: Thesaurus, Acronyms, Encyclopedia, Wikipedia.

mild steel

n
(Metallurgy) any of a class of strong tough steels that contain a low quantity of carbon (0.1–0.25 per cent)
ThesaurusAntonymsRelated WordsSynonymsLegend:
Noun1.mild steel - steel with less than 0.15% carbonmild steel - steel with less than 0.15% carbon  
steel - an alloy of iron with small amounts of carbon; widely used in construction; mechanical properties can be varied over a wide range
References in periodicals archive ?
Applicability of Langmuir adsorption isotherm to the adsorption of Musa acuminate peel on mild steel confirms the formation of multimolecular layer of adsorption where there is no interaction between the adsorbate and the adsorbent.
The HTSM-1 and HTSM-2 ranges are made of mild steel with zinc plating, a maximum torque of 500N/mm2 and a tolerance of +/- 0.1mm.
The corrosion of mild steel in 1 M NaOH solution containing various concentrations of inhibitor at different temperatures was studied by weight loss measurements.
Keywords Corrosion resistant coatings, Conducting polymer coatings, CdO, Poly(o-toluidine), Nanocomposites, Electrochemical polymerization, Cyclic voltammetry, Mild steel
When cutting mild steel using oxygen assist gas there is not a great difference in cut speed within the range of available beam qualities, however there is a significant change in cut-edge quality.
The investigation of mild steel corrosion and iron is a major theoretical issue and has attracted significant attention.
In our attempt to explore environmentally safe green inhibitors, gum exudates of Azadirachta indica were used to investigate the corrosion behavior of mild steel in 1M HCl solution.
Mild steel is a ductile and weldable alloy accounting for over 80% of the annual steel production worldwide.
The results of cyclic voltammetry suggest that the electrochemical copolymerization of aniline with o-anisidine on the mild steel in aqueous salicylate solution generates true copolymer coatings rather than the mixture of the corresponding homopolymers.
For the first time, customers can use the True Hole process to cut 8 mm mild steel at 80 amps, in addition to the existing 130 amp power level.
Dugdale, "Fatigue tests on notched mild steel plates with measurements of fatigue cracks," Journal of the Mechanics and Physics of Solids, vol.
Armorite has a mild steel backing that cushions the white iron, enabling it to withstand impact and it's easily weldable with minimal preparation.