millihenry

(redirected from millihenrys)
Also found in: Thesaurus, Encyclopedia.

mil·li·hen·ry

 (mĭl′ə-hĕn′rē)
n. pl. mil·li·hen·rys or mil·li·hen·ries Abbr. mh or mH
A unit of inductance equal to one thousandth (10-3) of a henry.

millihenry

(ˈmɪlɪˌhɛnrɪ)
n, pl -ry, -ries or -rys
(Units) one thousandth of a henry

mil•li•hen•ry

(ˈmɪl əˌhɛn ri)

n., pl. -ries, -rys.
a unit of inductance equal to 1/1000 of a henry.
[1905–10]
ThesaurusAntonymsRelated WordsSynonymsLegend:
Noun1.millihenry - a unit of inductance equal to one thousandth of a henrymillihenry - a unit of inductance equal to one thousandth of a henry
inductance unit - a measure of the property of an electric circuit by which an electromotive force is induced in it
henry, H - a unit of inductance in which an induced electromotive force of one volt is produced when the current is varied at the rate of one ampere per second
Mentioned in ?
References in periodicals archive ?
Study Parameters Material Specifics Laminate Polyclad #370 (Tg 170[degrees]C), 0.031" surface mount test board; compliant Surface finish Uyemura PRESA-RMK-20 matte, immersion tin; compliant Leaded solder Kester SnPb40, #44 rosin core wire, noncompliant Pb-free solder Kester SAC-305 (SnAg3.0Cu0.5), Pb-free wire, compliant Chip inductor Cooper Bussman, #UP 0.4 SA 682, 6.85 millihenrys, compliant Header FCI Electronics, #54201, noncompliant Thick film resistor Multicomp, #MC-0603-WCF, 100 [ohm], compliant Soldering iron Weller TC 201T, standard tip Lead pull wires Alpha Wire Co, 20 AWG, Cu-coated with tin wire Table 2.