has launched two buck dc-dc converters, the RP516 and RP517, designed for use in wearable devices and Internet of Things (IoT) applications requiring advanced solutions for extending battery life, as well as reduced mounting area
and weight on high-density boards.
An optimized feeder mounting area
on the arm reduces equipment interference.
The simulator will be located in a new therapy room close to the mounting area
, so that our existing mounting hoist can be used for wheelchair users.
Ruger's triple locking cylinder, along with a beefed-up frame in the topstrap, sidewalls, and barrel mounting area
make the Super Redhawk a dependable revolver for shooting big-bore calibers like the .480 Ruger and the .454 Casull.
The compact FH53M Series flexible-printed-circuit (FPC) connector saves valuable PCB real estate via a back-flip style actuator that minimizes the required mounting area
. The connector has a 0.25-mm pitch, mounted depth of 3.2 mm, and height of 0.65 mm.
Before purchasing one of these mounts, we recommend downloading the drawings from Guardian's site and probing behind the panel to measure the potential mounting area
. In some aircraft, we suspect the clearance won't be available.
TDK said its SESUB technology provides numerous advantages, such as enabling miniaturization by reducing the mounting area
on substrates and a thinner profile by achieving a 300 I1/4m thickness.
In all likelihood, this was done to decrease the odds of the steel bushing eventually shooting loose where it fits into the softer aluminum slide, as the increased mounting area
spreads out the load over a greater area of the slide, decreasing the stress that one lug alone would experience.
Below the I/O shield area, Corsair has included eight PCI expansion brackets and at the bottom you have a standard PSU mounting area
. The Obsidian 550D sits on four completely rubber based horizontally "L shaped" stands and keep vibrations from the case on your desk at bay.
What you are doing is simply lengthening the mounting area
of the rear bridge following the original contour.
(a company of Tanaka Precious Metals) today announced that Tanaka Kikinzoku Kogyo K.K., which operates the Tanaka Precious Metals' manufacturing business will commence the provision of samples of gold-tin alloy bonding material (AuSn alloy lid) which is able to seal ultra-compact crystal oscillators(*1) with a mounting area
of 1.2 mm x 1.0 mm at half the material cost of conventional products from March 22 (Friday).