nonconducting


Also found in: Thesaurus, Wikipedia.

nonconducting

(ˌnɒnkənˈdʌktɪŋ) or

nonconductive

adj
(General Physics) physics not able to conduct electricity, sound, or heat
ThesaurusAntonymsRelated WordsSynonymsLegend:
Adj.1.nonconducting - not able to conduct heat or electricity or sound
References in periodicals archive ?
Its purpose is to confirm that the insulation and isolation of the nonconducting surfaces from the operating voltage is sufficient to avoid a shock hazard.
DRILLING DRILL When using a power drill, choose a model with a plastic nonconducting body.
The HC1-SDS binary dopant system was used to extend the life of PANI and its nanocomposites in doped form since conventional dopants such as HCl diffuse out of the polymer during the drying process, leaving behind an electrically nonconducting film.
If not, move the source away from you and the person, using a dry, nonconducting object made of cardboard, plastic or wood.
Consider a cylindrical core of length b and of radius R located in an unbounded nonmagnetic and nonconducting space coaxially with an external constant uniform magnetic field of strength [??] (Fig.
Due to the discontinuity of a and to obtain uniqueness in the nonconducting regions, unless the solution is divergence free and a classical inf - sup stability relation holds, the state equation must be regularized.
The hydromagnetic non-Newtonian effects offered quite better performance for circular squeeze films in comparison with the case of a nonconducting Newtonian lubricant.
The system remains nonconducting even imposing an orbitally ordered solution to the undistorted cubic structure.
This treatment primarily provides an inexpensive [15, 16], nontoxic [17,18], reasonably hard, highly adherent, and electronically nonconducting phosphate coating [13].
An electrically conducting, incompressible, and Newtonian fluid is driven by a nonconducting porous sheet, which is stretching linearly in the x-direction.
On the contrary, the charge/voltage across capacitor is retained during every negative half cycle of the input, since the diode D1 is nonconducting and the only discharge path for C1 is through the output terminal [V.sub.o] [41, 43].
Such conductivity values are attributed to the nonconducting character of tested complexes [29].