overcut


Also found in: Encyclopedia.

overcut

(ˌəʊvəˈkʌt)
vb (tr)
to cut too much
Mentioned in ?
References in periodicals archive ?
For the execution of the construction work, The construction of 19 construction pits consisting of overcut bored pile walls (d = 90 cm and d = 120 cm) is required, Which will subsequently be expanded into cast-in-place shaft structures.
"A similar sequence is repeated for the next level up, and the slot raise can be drift divided or drilled once the stope has been undercut and overcut," McKirdy reported.
It is neither intelligent nor responsible forest policy when a vaunted university can legally liquidate previously overcut stands--and receive ratepayer subsidies!
Some slight reprieve there but there was none shortly afterwards as Ricciardo managed to execute an overcut on Hamilton when he stopped for fresh tyres a lap later.
Ferrari tried a different strategy and kept both their cars out for longer, it worked for Vettel as he maintained his lead at the front, but the overcut failed to work for Raikkonen, who was unable to jump Hamilton - who had stopped over 10 laps before - during the only round of pit stops.
When the excavator is placed in 'Autos' mode, the operator controls the stick, and Trimble Earthworks controls the boom and bucket, to stay on grade, reduce overcut, and increase production.
"For instance, Saudi Arabia has overcut in terms of its target as part of the deal last year.
Despite the small overcut of only a few centimeters, no damages were detected at the coating after the pipe laying.
Santoki et al [8] studied the influences of EDM parameters on Overcut. In their work different types of tool materials were analyzed and it was found that copper tool has low wear rate than silver and Graphite tool.
In dialogue-heavy scenes, he chose not to overcut, paying close attention to the way actors processed information and reacted to each other.
The six parameters, that is, pulse on time, pulse off time, peak current, spark gap voltage, wire feed, and wire tension, were varied to investigate their effects on output responses, that is, MRR, overcut, and surface roughness.
Williams missed one chance to take the decider after Robertson overcut a blue, but sealed the frame at the second opportunity.