series elements

Translations

series elements

npl (Phys) → elementi mpl in serie
References in periodicals archive ?
([dagger]) In an LC network, the series elements are inductors while the parallel elements are capacitors.
Scrutiny of this table demonstrates that the series elements are well matched but not the parallel elements.
However, uniplanar technologies, such as coplanar waveguide (CPW) and coplanar stripline (CPS), possess many well known advantages over microstrip for monolithic microwave and hybrid integrated circuits, These include low dispersion, insensitivity to substrate thickness, easy connection of both shunt and series elements, the ability to easily realize short circuit elements and the elimination of via holes (reducing cost and parasitic inductance).
In general, the matching requirements encountered in the design of a distributed-element MMIC demand the use of both series and shunt passive elements -- series elements dictating the length of the chip and shunt elements dictating the width.
When the first two series elements were reversed, the 4% solution was followed not by 32% but by nonreward, yet the rats approached that nonreward as if it were 32%.
The input impedance of the series elements of LPF is given as:
This circuit is fabricated on sapphire with planar process capacitors as the series elements and air wound coils as the shunt inductors.
The M1 addresses products such as double-balance mixers, the M2 series does the same for PIN and NIP series elements for switches, and the M3 series for sampling bridges.