slump test


Also found in: Medical, Encyclopedia, Wikipedia.

slump test

n
(Civil Engineering) Brit a test to determine the relative water content of concrete, depending on the loss in height (slump) of a sample obtained from a cone-shaped mould
References in periodicals archive ?
Now, beyond those products we have the ACE Slumper offering the Slump test in 4 minutes under full automation with 100% repeatability and self cleaning; the ACE H-Cap Scale, a high capacity scale with test guidance and operation; the ACE Atteberger, executing the PL and LL under full automation in approximately 30 minutes; the ACE Auto-Proctor, completing Proctor testing in full automation with 100% repeatability.
However, the sympathetic slump test (SST) provoked the LBP and revealed limited left rotation.
The average depth penetration of three determinations is correlated with the standard slump test.
In addition to the Habermann product offerings, CAM Sales will introduce at World of Concrete the "Anderson" Drycast Concrete Slump Test Equipment, and promote BFS wet or dry cast production systems for pipes, box culverts, manholes and other precast components or structures; Brecon/Bosch vibration equipment; and, EuroBend steel mesh and rebar reinforcement fabrication equipment.
3 kg of soil were prepared at 30-40 wt% of water concentration, and slump test experiments were carried out as suggested by Pashias et al.
Workability of concrete was measured by slump test.
The slump test was done in compliance with the technique set forth in EN 12350--2, and the spread table test complied with EN 12350--5; however, the cone shape was not standard (bottom diameter--200 mm, top diameter--100 mm, height--300 mm).
It was observed during the slump test that Mix II containing 20 (Percent) SBR latex collapsed and it was not possible to measure slump.
Types and marking of concretes of seven sets of test cubes Basic composition Admixture and additive Number Marking of concrete mixture of cubes of mixture Reference - 3 R1 12% epoxy dispersion 3 R1E - 3 R2 12% epoxy dispersion 3 R2E 30% slag 3 R3 30% slag + 12% epoxy 3 R3E dispersion 30% fly ash 3 R4 30% fly ash From raw + 12% epoxy dis- 3 R4E concrete persion recyclate 10% silica 3 R5 10% silica + 12% epoxy 3 R5E dispersion 30% fly ash + 3 R6 10% silica 30% fly ash + 10% silica + 12% 3 R6E epoxy dis- persion From penetrated - 3 R7 concrete recyclate 12% epoxy dispersion 3 R7E Basic composition Admixture and additive Slump test acc.
15) hanno indagato il femoral slump test e le risposte normali al test; si sono soffermati, tra l'altro, nell'analizzare la correlazione tra misura di estensione di anca e flessibilita dei flessori d'anca, degli estensori di ginocchio e la flessibilita in generale.
It shows how to screen paste candidates for quality using printability tests, slump test, solder ball test and wetting tests, and how to select a robust solder paste material using design of experiments.
The Slump test was conducted on fresh concrete for various percentage of replacement of fine aggregate with Copper slag and their results are tabulated below.