solderings

solderings

(ˈsɒldərɪŋz)
pl n
(Metallurgy) metallurgy any parts which have been soldered together
Collins English Dictionary – Complete and Unabridged, 12th Edition 2014 © HarperCollins Publishers 1991, 1994, 1998, 2000, 2003, 2006, 2007, 2009, 2011, 2014
References in classic literature ?
So they set to work in one of the big yellow rooms of the castle and worked for three days and four nights, hammering and twisting and bending and soldering and polishing and pounding at the legs and body and head of the Tin Woodman, until at last he was straightened out into his old form, and his joints worked as well as ever.
Grafting and soldering take badly on works of this nature, which should gush forth in a single stream and so remain.
First he took out a soldering iron and some plumbing solder, and then small oil lamp, which gave out, when lit in a corner of the tomb, gas which burned at a fierce heat with a blue flame, then his operating knives, which he placed to hand, and last a round wooden stake, some two and a half or three inches thick and about three feet long.
Nevertheless, it is conceivable that the general pattern of an organ might become so much obscured as to be finally lost, by the atrophy and ultimately by the complete abortion of certain parts, by the soldering together of other parts, and by the doubling or multiplication of others,--variations which we know to be within the limits of possibility.
It was a small cavity under ten feet of water; but I think that I can warrant the pond not to need soldering till they find a worse leak than that.
Soldering is often viewed as a relatively safe process that is performed in classrooms, maker-spaces, Fab Labs, technology and engineering labs, and science labs.
With practice and training, students can develop skills to enhance their ability to perform more complex soldering applications, Advanced educational programs and electronic manufacturing companies use J-STD (J Standards) 001-006 as the benchmarks for soldering quality.
While OSHA provides guidelines for soldering and brazing in the workplace, it offers very limited information applicable to soldering in school settings.
General soldering safety guidelines are provided by Roy and Love (2017, p.
Solder can spit, therefore ANSI/ISEA Z87.1-rated safety glasses or goggles must be worn while soldering.
Conduct all soldering on a level, fire-resistant surface away from any combustible materials or vapors.
Always place the soldering iron securely in the stand when not in use.