solid injection


Also found in: Encyclopedia, Wikipedia.

solid injection

n
(Automotive Engineering) injection of fuel directly into the cylinder of an internal-combustion engine without the assistance of an air blast to atomize the fuel. Also called (in a petrol engine): direct injection Compare blast injection
Collins English Dictionary – Complete and Unabridged, 12th Edition 2014 © HarperCollins Publishers 1991, 1994, 1998, 2000, 2003, 2006, 2007, 2009, 2011, 2014
References in periodicals archive ?
However, the benefits of this technology also come with some limitations, notably higher equipment costs as well as parts with rougher surfaces and lower mechanical properties compared with those of normal solid injection molded parts.
Instruments 881 Compact IC pro-Anion--MCS 2.881.0030 IC conductivity detector 2.850.9010 Combustion Module 2.136.0700 Autosampler MMS 5000 2.136.0800 Kit for solid injection 6.7302.000 920 Absorber Module 2.920.0010 MagIC NetTM 2.4 Compact 6.6059.241 Metrosep A Supp 5--150/4.0 6.1006.520 Metrosep A Supp 4/5 Guard/4.0 6.1006.500 Metrosep A PCC 1 HC/4.0 6.1006.310 Solutions Eluent anions c([Na.sub.2]C[O.sub.3]) = 3.2 mmol/L c(NaHC[O.sub.3]) = 1.0 mmol/L Suppressor regeneration c([H.sub.2]S[O.sub.4]) = 100 mmol/L solution Suppressor rinsing Ultrapure water Absorber solution 100 ppm [H.sub.2][O.sub.2] Parameters Ion Chromatography Recording time 20 min Column Metrosep A Supp 5--150/4.0 Flow 0.7 mL/min Temp.
It uses a far more solid injection and interception method than my earlier efforts
Ernsberger and Hunerberg also agree that, in some respects, structural foam is easier to run than solid injection molding.
By creating the instrument panel for the new Ford Escape in microcellular foam, it is claimed its weight is reduced by more than 11b, mechanical properties are improved, moulding cycle time is reduced by 15 percent and moulding clamp tonnage is reduced by 45 percent, saving an estimated 1.85 per vehicle versus solid injection moulding processes.
In Chapter 10, Rolt refers to the seldom-acknowledged fact that the progenitor of the modern high-speed compression-ignition engine was Herbert Akroyd Stuart's 'solid injection' machine: Akroyd Stuart's patents preceded those of Rudolph Diesel and his 'blast injection' engine by several years.
With solid injection molding, it is necessary to inject all the resin to the end of flow prior to skin closure.
Cookson's structural foam pallets are claimed to have a higher strength to weight ratio than conventional solid injection moulded ones, with up to four times the rigidity of solid parts of similar weight.
Instruments 881 Compact IC pro--Anion--MCS 2.881.0030 IC conductivity detector 2.850.9010 Combustion Module 2.136.0700 Autosampler MMS 5000 2.136.0800 Kit for solid injection 6.7302.000 920 Absorber Module 2.920.0010 MagIC NetTM 2.4 Compact 6.6059.241 Metrosep A Supp 5--150/4.0 6.1006.520 Metrosep A Supp 4/5 Guard/4.0 6.1006.500 Metrosep A PCC 1 HC/4.0 6.1006.310 Solutions Eluent anions c([Na.sub.2]C[O.sub.3]) = 3.2 mmol/L c(NaHC[O.sub.3]) = 1.0 mmol/L Suppressor regeneration solution Suppressor rinsing c([H.sub.2]S[O.sub.4]) = 100 mmol/L Absorber solution Ultrapure water Standard Chromatogram 100 ppm [H.sub.2][O.sub.2] Parameters Ion Chromatography Recording time 20 min Column Metrosep A Supp 5-150/4.0 Flow 0.7 mL/min Temp.
It allows direct comparison of large parts, such as auto instrument panels, produced by solid injection and microcellular physical foaming with gas injection.