Then they started to tack-weld
pieces together to be sure things fit and that they were on the right track.
It is pure hand-made fabricated without even a tack-weld
, Guinness World Records ExecutiveAaRepresentative in the Middle East Talal Omar said, stressing that the sculptureAameets Guinness World Records' conditions which states that the sculpture must be 90% handmade while this is 100% handmade.
Some might be tempted to tack-weld
the bent part, but I found that it was flexure free without this extra step.
a good secondhand thro-out bearing around the spline shaft that will carry the wind cups.
When the components have been positioned on the assembly fixture, Dr Allison says, "we tack-weld
them, measure their positions, complete the welds, then measure their positions again."
The indictment said companies affiliated with Liu went through ports in the Los Angeles area to import aluminum extrusions that were "tack-welded
" together, to appear as finished "pallets" that were not subject to duties.
You can still see a small spot of stainless steel where the old barrel was tack-welded
to the receiver, but this is covered by the stock and does not show.
Once the bolt shank was tack-welded
in place, I rearranged my magnetic clamps and filled in the V-grooves with weld.
(2) Before welding, the web and the flange were tack-welded
However, if shackles are used on older vehicles/ the nut has to be tack-welded
in place to prevent the shackles From being easily removed From the vehicle.
The 12 mm thick backing plates were tack-welded
to the base plates.
The pre-sintered preforms consist of a blend of super alloy and low-melting point braze and are customized to fit the shape of the component and then tack-welded
into place and brazed.