Caption: Once I had a toolhead
set up for the .41,1 was able to load whatever power levels I wanted, without breaking the bank.
To feed Ed Brown's IPSC Edition, I only had to step into the shop, dust off the press, install the .45 ACP toolhead
and shell plate, and adjust the powder measure for 5.8 grains.
The GSI Toolhead
features an integrated bullet feed mechanism that delivers bullets to the seating station in true progressive fashion.
A new feature for Kongsberg XL tables, the MultiCUT toolhead
has been designed specifically for shops that need to cut materials for a wide range of applications.
The Esco Mach 647 has a 6.35 mm capacity and features a rotating toolhead
offering up to 12,000 rpm and four independent cutting tools for more sophisticated parts.
A curved bar contacts the tab as bottles are transported neck up from trimming , gently bending the tab up close to the bottom, then a pneumatic punch with tab shape toolhead
pops up and snaps the tab into the bottom recess.
With its suggested retail price of $299 (double that of a conventional contractor-grade saw), you have to be a serious toolhead
to pop for one.
: The toolhead
is fastened to the ram on a circular plate so that it can be rotated for making angular cuts.
This is a four-station press that features auto priming, auto powder charging and boasts extremely quick caliber changeovers with a unique removable toolhead
Because of its size, the SixDOF can be mounted on the toolhead
of a manipulator arm to track reflective references on the workpiece.
The company introduced the MultiCUT toolhead
for the Kongsberg XL22 sample-making table designed for cutting, creasing and scoring low volume corrugated and folding carton jobs.
The base adapter and the interchangeable driven toolhead
are designed to be bolted together by four screws, similar to the lower and upper housing parts of a monoblock unit [ILLUSTRATION FOR FIGURE 4 OMITTED].